- Sort by Default Order
- Display 12 Products per page
-
2046A | Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
• Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2046A-09 | Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.01 mm Graduation | MITUTOYO
• Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• The grand gear is made of stainless steel with high resistance to wear and deformation.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
2109A-10 | Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
Dial Indicator SERIES 2 — Standard Type, 0.001 mm & 0.005 mm Graduation | MITUTOYO
• Standard 0.001 mm and 0.005 mm graduation dial indicators having a bezel with an outside diameter of 57 mm.
• The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools.
• Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration.
• The stem and spindle are made ofhigh-strength quench-hardened stainless steel suitable for heavy-duty use.
• A carbide contact point is used.
• A special alloy is used for the sector gears to provide improved wear resistance.
• The indicator uses jeweled bearings, providing excellent indication sensitivity and durability.
• Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance. -
543-390 | ABSOLUTE Digimatic Indicator ID-CX- SERIES 543 Standard Type | MITUTOYO
ABSOLUTE Digimatic Indicator ID-CX- SERIES 543 Standard Type
Order No. 543-390
Description
• The ABS (absolute) scale restores the last origin position automatically when the indicator is turned on.
• Thanks to Mitutoyo’s ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors.
• Tolerance judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NO-GO) can be displayed in full-size characters.
• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
• Large LCD
The large LCD incorporates 11 mm characters giving 1.5 times the character area of conventional products
(which display 8.5 mm characters) making measurement values much easier to read.
• Three large buttons
The popular three-large button design, which is used in products such as the ABS coolant proof Digimatic indicators ID-N /B, makes buttons easier to press and operations easier to perform.
• 330º rotary display
The display can be rotated 330°, allowing use at a position where you can easily read the measurement value.
• Calculation: f (x) =Ax
Mounting the ID-CX on a measuring jig and setting the multiplying factor (to any practical value) allows direct indication of size (see example below) without using a conversion table and so improves measurement efficiency.
• Function Lock
Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake.
-
543-390B | ABSOLUTE Digimatic Indicator ID-CX- SERIES 543 Standard Type | MITUTOYO
ABSOLUTE Digimatic Indicator ID-CX- SERIES 543 Standard Type
Order No. 543-390B
Description
• The ABS (absolute) scale restores the last origin position automatically when the indicator is turned on.
• Thanks to Mitutoyo’s ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors.
• Tolerance judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NO-GO) can be displayed in full-size characters.
• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
• Large LCD
The large LCD incorporates 11 mm characters giving 1.5 times the character area of conventional products
(which display 8.5 mm characters) making measurement values much easier to read.• Three large buttons
The popular three-large button design, which is used in products such as the ABS coolant proof Digimatic indicators ID-N /B, makes buttons easier to press and operations easier to perform.
• 330º rotary display
The display can be rotated 330°, allowing use at a position where you can easily read the measurement value.
• Calculation: f (x) =Ax
Mounting the ID-CX on a measuring jig and setting the multiplying factor (to any practical value) allows direct indication of size (see example below) without using a conversion table and so improves measurement efficiency.• Function Lock
Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake. -
543-394 | ABSOLUTE Digimatic Indicator ID-CX- SERIES 543 Standard Type | MITUTOYO
ABSOLUTE Digimatic Indicator ID-CX- SERIES 543 Standard Type
Order No. 543-394
Description
• The ABS (absolute) scale restores the last origin position automatically when the indicator is turned on.
• Thanks to Mitutoyo’s ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors.
• Tolerance judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NO-GO) can be displayed in full-size characters.
• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
• Large LCD
The large LCD incorporates 11 mm characters giving 1.5 times the character area of conventional products
(which display 8.5 mm characters) making measurement values much easier to read.• Three large buttons
The popular three-large button design, which is used in products such as the ABS coolant proof Digimatic indicators ID-N /B, makes buttons easier to press and operations easier to perform.
• 330º rotary display
The display can be rotated 330°, allowing use at a position where you can easily read the measurement value.
• Calculation: f (x) =Ax
Mounting the ID-CX on a measuring jig and setting the multiplying factor (to any practical value) allows direct indication of size (see example below) without using a conversion table and so improves measurement efficiency.• Function Lock
Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake. -
543-394B | ABSOLUTE Digimatic Indicator ID-CX- SERIES 543 Standard Type | MITUTOYO
ABSOLUTE Digimatic Indicator ID-CX- SERIES 543 Standard Type
Order No. 543-394B
Description
• The ABS (absolute) scale restores the last origin position automatically when the indicator is turned on.
• Thanks to Mitutoyo’s ABSOLUTE Linear Encoder, reliability has been increased due to elimination of over-speed errors.
• Tolerance judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NO-GO) can be displayed in full-size characters.
• Battery life of approx. 7,000 hours in continuous use has been achieved with only one battery.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
• Large LCD
The large LCD incorporates 11 mm characters giving 1.5 times the character area of conventional products
(which display 8.5 mm characters) making measurement values much easier to read.• Three large buttons
The popular three-large button design, which is used in products such as the ABS coolant proof Digimatic indicators ID-N /B, makes buttons easier to press and operations easier to perform.
• 330º rotary display
The display can be rotated 330°, allowing use at a position where you can easily read the measurement value.
• Calculation: f (x) =Ax
Mounting the ID-CX on a measuring jig and setting the multiplying factor (to any practical value) allows direct indication of size (see example below) without using a conversion table and so improves measurement efficiency.• Function Lock
Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake.
