Feature
| Order No. | 518-352E-21 |
|---|---|
| Model | LH-600EG (*3) (with power grip) |
| Measuring range (Stroke) | 0 to 977 mm (600 mm) 0 to 38 in (24 in) |
| Resolution | 0.0001/ 0.001/ 0.01/ 0.1 mm (selectable) 0.000001/0.00001/0.0001/0.001 in (selectable) |
| Accuracy at 20 ˚C Indication accuracy*1 | (1.1 + 0.6L / 600) μm, L=Measured length (mm) |
| Accuracy at 20 ˚C Repeatability*1 | Plane: 0.4 μm (2σ), Hole: 0.9 μm (2σ) |
| Accuracy at 20 ˚C Perpendicularity (forward and backward)*2 | 5 μm (after compensation) |
| Accuracy at 20 ˚C Straightness (forward and backward)*2 | 4 μm (mechanical accuracy) |
| Guiding method | Roller bearing |
| Driving method | Motor-driven (5, 10, 15, 20, 25, 30, 40 mm/s: 7 steps) /Manual |
| Scale unit | Reflective-type linear encoder |
| Measuring force | 1 N (automatic constant-force function) |
| Balancing method | Counter weight balance |
| Main unit moving mode | Full-floating (moving) / Semi-floating (measuring) air bearing |
| Air source | Built-in compressor |
| Monitor | 5.7 inch COLOR TFT LCD |
| Max. number of programs | 50 |
| Max. number of measured data | 60,000 (Max. number of data is 30,000 /per program) |
| Power supply | AC adapter/ Battery (NiMH) |
| Battery operation time | Approx. 5 hours (compressor duty cycle 25 % max.) |
| Battery charging time | Approx. 3 hours (usable during charge) |
| Dimensions (W×D×H) | 247×438×1013 mm |
| Mass | 24.5 kg |
| Operating temperature / humidity ranges | 5 to 40 ˚C/ 20 to 80 % RH (non-condensing) |
| Storage temperature / humidity ranges | -10 to 50 ˚C/ 5 to 90 % RH (non-condensing) |
*1 Guaranteed when using the standard eccentric ø5 probe.
*2 Guaranteed when using the Lever Head (519-521), Mu-Checker (519-561).
*3 Order No. depends on the destination as shown in the table on the right.
Note: To obtain maximum measurement accuracy, please note the following:
• Use in an environment that is as close as possible to 20 ˚C, and subject to minimal temperature change over time.
• Use in conjunction with a surface plate of JIS 1 class, or higher, flatness specification.
