• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
| Order No. | 530-100 |
|---|---|
| Range: | 0 - 100 mm |
| Maximum permissible error*²(EMPE): | ±0.05 mm |
| Maximum permissible error*²(SMPE): | ±0.07 mm |
| Depth bar: | ø1.9 mm rod |
| Graduation: | 0.05 mm |
| Remarks: | - |
*1 Partial Measuring Face Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in JIS B 7507: 2016, revised based on ISO 13385-1: 2011. Refer to page D-45 for details.
*2 Partial Surface Contact Error, EMPE and Shift Error, SMPE are terms (notations) used in ISO 13385-1:2019.
| Range (mm) | A | B | D | E | F | H | L | Oustside jaw thickness |
|---|---|---|---|---|---|---|---|---|
| 0 - 100 | 17 | 21.5 | 40 | 53.5 | 30 | 16 | 182 | 3 |
| 0 - 150 | 17 | 21.5 | 40 | 53.5 | 30 | 16 | 229 | 3 |
| 0 - 200 | 20.5 | 25 | 50 | 53.5 | 30 | 16 | 288 | 3 |
| 0 - 300 | 22 | 27.5 | 64 | 66.5 | 36 | 20 | 404 | 3.8 |
| 0 - 600 | 38 | 47 | 90 | 89 | 50 | 25 | 780 | 6 |
| 0 - 1000 | 50 | 60 | 130 | 111 | 61 | 32 | 1240 | 8 |
Note: 530-100 and 530-102 incorporate a round depth bar (ø1.9 mm).
The depth bar shown in the illustration above is a different type.
Steel Standard Straight Edge-บรรทัดเช็คตรงแบบเรียบ-SK
CENTRAL AREA
J.SRI RUNG RUENG IMPEX
CO.,LTD
850/1 Soi. Ladkrabang 30/5,
Ladkrabang Rd.,Kwang Ladkrabang
Khet Ladkrabang, Bangkok 10520
Thailand
Email : [email protected]
LUMPOON BRANCH
231/17 Moo. 4 T.Ban Klang A.Mueang Lumpoon, Lumpoon 51000
Thailand
Email : [email protected]
Line @ : @jsrgroup
EASTERN AREA
C.DUREON MACHINE AND
TOOLS CO.,LTD
888 Moo 4 Bypass-Chonburi Rd, T.Nongmaidaeng,A.Muang Chonburi,Chonburi 20000
Thailand
Tel : 038-215-726-8,038-743-414-21, 061-401-2144-8
Email : [email protected]
NAKHONRATCHASIMA BRANCH
1444/50-51 M.13 T.Joho A.Muang Nakhonratchasima,
Nakhonratchasima 30310 Thailand
Email : [email protected]
530-102 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm| MITUTO...