SPECIFICATION
| Measuring eange | 2.0～500 mN･m 0.020～5 kgf・cm 0.020～4.5 lbf・in | |
| Accuracy | ±0.5％ (499 or less digit±3digit) | |
| Display | The 4 figures digital display of LCD | |
| Measurement Mode | PP | peak to peak The highest value of load is hold-displayed. |
| TR | track A display also changes with load change. | |
| PD | peak-down Load catches and displays the moment included in descent from a rise. |
|
| C | Real-time Output Load torque value is outputted every about1/ 160 second. |
|
| A success or failure judging function | High and low value are measurement within the limits, and can be set up. Five-set preservation is possible. |
|
| The Maximum, minimum, and the average value | The data number, the maximum, the minimum value, and the average value of memory data are displayed. |
|
| Data memory counts | 800 data | |
| Data output | ASCII format (baud rate 19200) | |
| auto clear time | If the set-up time comes, measurement value will be automatically cleared in 0.0~3.0 seconds (0.5s interval). | |
| Setup of count | 1 to 99 count (count in a clockwise direction) | |
| Power supply | Ni-MH chargeable battery | |
| Charge time / use time | Charge about 3 hour /, continuation about 12-hour use | |
| Auto-power-off | After the neglect during 10 minutes | |
| Bit / Socket part | ◒ Ø4 | |
| Weight | 180ｇ |
|
| Accessories (one piece each) | ◒ Ø4 Bit + #1（For one-way×1 For fixation×1) |
|
| Exclusive charger | ||
| Result of calibration document Certification on calibration document / Traceability system figure |
||
| Option | When outputting data, the cable(USB miniB) is needed. |
|
| Outside-dimension | ||
