Feature
| Order No. | 133-174 |
|---|---|
| Range (mm): | 825 - 850 |
| Graduation (mm): | 0.01 |
| Maximum permissible error J MPE (μm): | ±14 |
| Digital/Analog: | Analog |
| Inch-Metric: | Metric |
133-174 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 825-850 mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-174
Range : 825-850mm
Description :
This is a standard single rod type inside micrometer (individual unit), with the following features:
- Standard single rod.
- Carbide measuring faces.
สินค้าที่เกี่ยวข้อง
-
511-209 | BORE GAGE SERIES 511 – FOR SMALL HOLES, 6-10mm | MITUTOYO
BORE GAGE SERIES 511 – FOR SMALL HOLES
Order No. 511-209
Range: 6 – 10mm
Description :
• These gages are designed to measure the diameters of very small holes.
• Select an indicator from the recommended dial indicators and Digimatic indicators. Please contact us for advice when using an indicator other than the recommended indicators.
• Customized products with a longer rod below the grip or with a carbide anvil are available upon request. -
511-501 | BORE GAGE SERIES 511 – ABSOLUTE DIGIMATIC BORE GAGE, 45-100mm | MITUTOYO
BORE GAGE SERIES 511 – ABSOLUTE DIGIMATIC BORE GAGE, 45-100mm | MITUTOYO
Order No. : 511-501
Range: 45-100 mm
Description
• These ABSOLUTE Digimatic bore gages are exclusively designed for inside diameter measurement.
• ABS (ABSOLUTE) type bore gages are not subject to overspeed error.
• Up to four Extension Rods (optional) can be connected for measuring at the bottom of a hole 2 m deep.
• The display and grip can be rotated up to 320° and the display can be inclined up to 90°, so that it is easily readable from any direction.
• The minimum value holding function provides easy measurement of hole diameter. -
511-761 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 18-35mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-761
Range: 18-35 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid.
CENTRAL AREA
J.SRI RUNG RUENG IMPEX
CO.,LTD
850/1 Soi. Ladkrabang 30/5,
Ladkrabang Rd.,Kwang Ladkrabang
Khet Ladkrabang, Bangkok 10520
Thailand
- Tel : 02-327-0351-5,
-
- 02-734-4588
- Mobile : 080-414-5551
- Fax : 02-327-0356-7,
-
- 02-734-4519-20
Email : [email protected]
- Line ID : jsri_nopporn
Line @ : @jsrgroup
LUMPOON BRANCH
231/17 Moo. 4 T.Ban Klang A.Mueang Lumpoon, Lumpoon 51000
Thailand
- Tel : 061-689-8649
Email : [email protected]
Line @ : @jsrgroup
EASTERN AREA
C.DUREON MACHINE AND
TOOLS CO.,LTD
888 Moo 4 Bypass-Chonburi Rd, T.Nongmaidaeng,A.Muang Chonburi,Chonburi 20000
Thailand
Tel : 038-215721-6,
- 038-743417-21
Mobile : 061-401-2144-48
- Fax : 038-743-422
Email : [email protected]
- Line ID : cdc-jsrgroup
Line @ : @jsrgroup
NAKHONRATCHASIMA BRANCH
1444/50-51 M.13 T.Joho A.Muang Nakhonratchasima,
Nakhonratchasima 30310 Thailand
- Tel : 099-464-6196
Email : [email protected]
- Line ID : jsrgroupkorat
Line @ : @jsrgroup
