TOP 1O REASONS TO USE HAIMER TOOL HOLDERS

HAIMER Tool Holders can give you the edge that will allow you to
sustain a long-term competitive advantage for your company.

1. Rigidity
Thanks to optimized stabilization from the spindle to the cutting edge, HAIMER delivers
a higher level of cutting performance. The symmetrical clamping force ensures perfect
power distribution and longevity of your equipment due to the highest precision of the
functional surfaces.
2. Runout accuracy
Uniform pressure on the cutting edges leads to, among other things, better dimensional
accuracy, surface finish, smoothness and tool life: HAIMER guarantees a runout
accuracy of <3 μm at 3xD for Shrink Fit Chucks, Power Collet Chucks, High Precision
Collet Chucks and HG Chucks.

3. Balancing quality
All HAIMER tool holders are fine balanced to G2.5 at 25,000 rpm or <1 gmm residual unbalance. Therefore, the spindle runs
quieter and achieves better surface finish on the work piece. The tool life is maximized and the lifetime of your spindle is
extended. Many times balanced tool holders and assemblies enable a significant increase in productivity.
4. Steep taper & HSK holders
The steep taper tool holders (SK, ISO, CAT, BT, BT with face contact) at HAIMER are consistently better than AT3. This results
in an optimal connection between the machine and tool. The roundness and straightness of the cone are inspected at 3,000
different points. The HSK holder has developed into the new standard for machining centers, especially at high speeds. Our
HSK tool holders are fine grinded on all functional surfaces and have tighter tolerances than the DIN norm.
5. 1OO % made by HAIMER
Everything made 100% in Germany – Thanks to our double 100% inspection, HAIMER consistently guarantees high quality, no
matter when the tool holder is purchased. Whenever it says HAIMER, it means it is made by HAIMER.

6. High quality material
HAIMER uses special raw materials, according to its own standard for the tool holders, and this is 100% checked by detailed
spectral analysis. The material offers high strength, high toughness and is perfect for the requirements of shrinking technology
– so that you can shrink in and out with repeatable accuracy as often as you like. There is no limit when using HAIMER shrink fit
and tool holders.
7. Variety of sizes
Our variety of lengths and geometries is unbeatable. Regardless of whether it is slim (Mini Shrink) or extremely stiff (Power or
Heavy Duty) versions, HAIMER has the right outer geometry in their program for every machining challenge. In addition to
shrinking technology, HAIMER also offers high-precision ER collet chucks, Power Collet Chucks and High Precision Collet
Chucks, HG Chucks, Weldon, face mill arbors and other clamping systems.
8. Program for all spindle interfaces
For a precise connection to the machine spindle and for the transmission of the speed and torque, HAIMER offers tool holders
in a wide range of interfaces. You will find common interfaces like SK, CAT, BT (with face contact), HSK or PSC, but also
exclusive interfaces depending on the machine tool manufacturer. No one else offers this kind of variety.
9. Upgrade possibilities & full service
Besides the standard versions, you can get a tool holder with many optional upgrades. Innovative solutions for consistent
cooling such as Cool Jet and Cool Flash or the patented Safe-
λock® pull-out protection, just to name a few. With Data-Lock,
HAIMER also offers a mechanical RFID chip protection and we can supply all equipped with a chip, including fine balancing, as a
full service. Further individual solutions are available.
1O. Industry 4.O
Industry 4.0 revolves around the collection and automatic, real-time evaluation of data to optimize the machining process.
Modern manufacturing requires technologies that can receive and send data. With the help of RFID chips or QR codes, tool data
can be transmitto the machine tool. With HAIMER, everything is in one system: The customer gets the tool holder, including
data-matrix code and the machine from a single source.

📧 Email: marketing2@jsr.co.th

—————————————————————-

J.SRI RUNG RUENG IMPEX CO.,LTD. (กทม. ลาดกระบัง)
TEL : 02-327-0351-5, 02-734-4588
Line : jsri_nopporn

—————————————————————-

C.DUREON MACHINE AND TOOLS CO.,LTD. (ชลบุรี)
TEL : 038-743-414-21, 038-215-725-8, 061-401-2144-8
Line : cdc-jsrgroup

—————————————————————-

JSR GROUP (KORAT) CO.,LTD (โคราช)
Tel : 099-464-6196
Email : dulphinit@jsr.co.th
Line : jsrgroupkorat

—————————————————————-
#หัวจับ #holder #haimer #jsrgroup

10 Resons to use Haimer Tool Holders

type-of-taps-on-web

Type of Taps

แว่นขยาย

OOTSUKA แว่นขยาย

TOHNICHI QL-MH

yamawa-z-pro

Yamawa Z-Pro Series

TD6N MOLDINO

vernier caliper

VERNIER CALIPER 530