- Sort by Popularity
- Display 24 Products per page
-
MC-SP | SPIRAL FLUTED TAPS with Internal coolant hole – ต๊าปร่องเลื้อย มีรูน้ำมันหล่อเย็น | YAMAWA
MC-SP
SPIRAL FLUTED TAPS WITH INTERNAL COOLANT HOLE
ต๊าปร่องเลื้อย มีรูน้ำมันหล่อเย็น
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Through internal coolant hole (center through type), satisfactory amount of oil is supplied to the exact cutting area. MC-SP spiral fluted tap ensures a long tool life as well as cuts high precision threads with good surface finish.
■ เป็นต๊าปที่มีรูน้ำมัน เพื่อใช้ในการหล่อเย็นต๊าบ MC-SP มีอายุการใช้งานที่ยาวนาน และมีการตัดเกลียวที่แม่นยำสูง และได้ผิวเกลียวที่ดี** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
SU-S-SP | Spiral Fluted Taps for Stainless Steel, Deep hole Use – ต๊าปร่องเลื้อยสำหรับงานเหล็กสแตนเลส รูลึก | YAMAWA
SU-S-SP
SPIRAL FLUTED TAPS FOR TOUGH STAINLESS STEEL, DEEP HOLE USE
ต๊าปร่องเลื้อยสำหรับงานเหล็กสแตนเลส, รูลึก
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ SU-S-SP is the short spiral fluted tap for stainless steels suitable for stainless steels tending to work-harden and sticky, as well as chrome steels and molybdenum steels. Blind hole use. Deeper hole tapping is attainable.
■ SU-S-SP เป็นต๊าปร่องเลื้อยสั้นสำหรับงานสแตนเลส ที่มีความแข็งและเหนียวเช่นเดียวกับ เหล็กโครเมียม และเหล็กโมลิปดีนัม เป็นต๊าปประเภทรูตัน และรูลึก** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
AU+SP | PLUS SERIES SPIRAL FLUTED TAPS, Optimum Coating for the tapping – ต๊าปร่องเลื้อยตระกูลบวก, เคลือบผิว | YAMAWA
AU+SP
PLUS SERIES SPIRAL FLUTED TAPS, Optimum Coating for the tapping
ต๊าปร่องเลื้อยตระกูลบวก, เคลือบผิว
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
• AU+SP has a special thread portion design with thread crests ground off and a few full threads after chamfer left unchanged.
• Effects of AU+SP are as follows:
– Prevention of chipping trouble at full thread portion
– Reduction of tapping torque and tapping friction
– Good chip ejection• AU+SP มีเหลียวที่ถูกออกแบบมาพิเศษ โดยปรับปรุงที่ร่องคายเศษ และเพิ่มเกลียวเต็มให้ส่วนเกลียวหลังแชมเฟอร์
• ผลของ AU+SP มีดังต่อไปนี้
– ป้องกันการแตกหักของเกลียวเต็ม
– ลดแรงบิด และแรงเสียดทานในการต๊าป
– การคายเศษมีประสิทธิภาพ** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
LS-PM-SP | LONG SHANK SPIRAL FLUTED TAPS for Hard-to-Machine Materials – ต๊าปร่องเลื้อยก้านยาว สำหรับวัสดุที่ต๊าปยาก | YAMAWA
LS-PM-SP
LONG SHANK SPIRAL FLUTED TAPS FOR HARD-TO-MACHINE MATERIALS
ต๊าปร่องเลื้อยก้านยาว สำหรับวัสดุที่ต๊าปยาก
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Long shank spiral fluted tap suitable for tapping hard steels with hardness between 35-45HRC such as forgings and thermal refined steels of high carbon steels and alloy steels, and mold steels.
■ ต๊าบร่องเลื้อยก้านยาว สำหรับเหล็กที่มีความแข็ง 35-45HRC เช่นเหล็กฟอจจิ้ง เหล็กกล้าคาร์บอนสูงชุบแข็ง, เหล็กกล้าผสม และเหล็กกล้าแม่พิมพ์** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
LS-SU-S-SP | Long Shank Spiral Fluted Taps for Stainless Steel, Deep hole Use – ต๊าปร่องเลื้อยก้านยาวสำหรับสแตนเลส รูลึก | YAMAWA
LS-SU-S-SP
LONG SHANK SPIRAL FLUTED TAPS FOR STAINLESS STEEL, DEEP HOLE USE
ต๊าปร่องเลื้อยก้านยาวสำหรับงานสแตนเลส, รูลึก
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ LS-SU-S-SP is the long shank short spiral fluted tap for stainless steels suitable for stainless steels tending to work-harden and sticky, as well as chrome steels and molybdenum steels. Blind hole use. Deeper hole tapping is attainable.
■ LS-SU-S-SP เป็นต๊าปร่องเลื้อยก้านยาวสำหรับงานสแตนเลส ที่มีความแข็งและเหนียวเช่นเดียวกับ เหล็กโครเมียม และเหล็กโมลิปดีนัม เป็นต๊าปประเภทรูตัน และรูลึก** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
AUXSP | X SERIES SPIRAL FLUTED TAPS, COATED – ต๊าปร่องเลื้อยตระกูลเอ็กซ์, เคลือบผิว | YAMAWA
AUXSP
X SERIES SPIRAL FLUTED TAPS, Coated
ต๊าปร่องเลื้อยตระกูลเอ็กซ์, เคลือบผิว
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
Use with dedicated toolings is recommended.
เลือกใช้เครื่องมือให้ตรงกับข้อแนะนำ■ Applying the blanks of high toughness and high accuracy, AUXSP derives the maximum performance from high facility machining centers and high precision toolings. Special thread portion design with thread crests ground off and a few full threads left unchanged. Combination of this design and the special flute geometry maintains good chip ejection and reduces friction. The Spiral Fluted Tap is adopting the optimum coating for the tapping condition.
■ ในการใช้วัสดุทำต๊าบที่มีความแข็งแรง และเที่ยงตรงสูง ส่งผลให้ AUXSP เป็นต๊าปที่มีประสิทธิภาพสูง รวมกับการออกแบบร่องคายเศษ ส่วนของเกลียว และลักษณะของฟัน ต๊าปแบบพิเศษ ทำให้ได้การต๊าปที่มีประสิทธิภาพสูง สามารถขับเศษได้ดี และลดแรงเสียดทานในการต๊าป** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
F-SP | SPIRAL FLUTED TAPS for High Speed Tapping – ต๊าปร่องเลื้อยสำหรับงานที่ใช้ความเร็วสูงเหมาะกับการใช้บนเครื่องจักร CNC (Syncronized Feeding) | YAMAWA
F-SP
SPIRAL FLUTED TAPS FOR HIGH SPEED TAPPING
ต๊าปร่องเลื้อยสำหรับงานที่ใช้ความเร็วสูงเหมาะกับการใช้บนเครื่องจักร CNC (Syncronized Feeding)Specification
Tapping Speeds depending on Materials
Product Features
● High speed machining is possible with a machine equipped with a fully synchronous feed mechanism.
● The F-SP exhibits excellent chip ejection properties from its unique flute shape and short thread length.
● At low speed, the shape and ejection of the chips can deteriorate, causing problems.***หากต้องการขอราคาสินค้า กรุณาระบุขนาดของสินค้าที่ต้องการ เพื่อความรวดเร็วในการตอบกลับ***
-
HC+SP OX | SPIRAL FLUTED TAPS FOR HIGHT CARBON STEELS, OXIDED-ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอนสูง | YAMAWA
HC+SP OX
SPIRAL FLUTED TAPS FOR HIGHT CARBON STEELS, OXIDED
ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอนสูง
Recommended Tapping Speeds depending on Materials / ความเร็วรอบจะข้นึ อยู่กับวัสดุท่ใี ช้ในการต๊าบ
■ Spiral fluted tap suitable for high carbon steels such as S55C and the like, oxided to avoid welding trouble.
■ ต๊าบร่องเลื้อยที่เหมาะสมกับเหล็กคาร์บอนสูง เช่น S55C, ผสมออกไซด์** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**