- Sort by Default Order
- Display 12 Products per page
-
530-123 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*High accuracy model*
Order No. 530-123
Range : 0 – 200 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-124 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*High accuracy model*
Order No. 530-124
Range : 0 – 300 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-312 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*High accuracy model: ±0.03mm
Order No. 530-312
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-316 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*Clamping screw below the slider
Order No. 530-316
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-320 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*Carbide-Tipped jaws for outside measurement*
Order No. 530-320
Range : 0 – 150 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-321 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*Carbide-Tipped jaws for outside measurement*
Order No. 530-321
Range : 0 – 200 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-322 | VERNIER CALIPER – STANDARD MODEL 0-300mm| MITUTOYO
VERNIER CALIPER – STANDARD MODEL
*Carbide-Tipped jaws for outside measurement*
Order No. 530-322
Range : 0 – 300 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-335 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*Carbide-Tipped jaws for outside and inside measurement*
Order No. 530-335
Range : 0 – 150 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-501 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-600mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-501
Range : 0 – 600 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-502 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-1000mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-502
Range : 0 – 1000 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
531-102 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-200mm | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-102
Range : 0-200 mm
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
-
531-103 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-300mm | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-103
Range : 0-300 mm
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
