- Sort by Popularity
- Display 36 Products per page
-
125-116 | Screw Thread Micrometer, 75-100 mm, 0.6-0.9 mm / 44-28 TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-116
Range : 75-100 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
123-113 | Disk Micrometer – Disks with Carbide Tips Series 123, 0-25 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-113
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
115-215 | Tube Micrometer – Spherical Anvil and Spindle Type, 0-25mm | MITUTOYO
TUBE MICROMETER – Spherical Anvil and Spindle Type – SERIES 115
Order No. 115-215
Range : 0-25 mm
• Measuring faces: Carbide.
(115-201: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
112-165 | Point Micrometer with Carbide Tip – Series 112, 0-25 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-165
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
102-311 | Outside Micrometers Series 102, 20-25 mm, 0.001 mm | MITUTOYO
Outside Micrometers Series 102,
Range : 20-25 mm
Graduation : 0.001 mm
Order No. : 102-311• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-158 | Outside Micrometer Series 103, 525-550 mm | Mitutoyo
Outside Micrometer Series 103
Range 525-550 mm
Graduation 0.01 mm
Order No. 103-158
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
147-105 | Can Seam Micrometers Series 147 – ไมโครมิเตอร์วัดกระป๋อง | MITUTOYO
Can Seam Micrometers Series 147
ไมโครมิเตอร์วัดกระป๋อง
Order No. : 147-105
Range 0-13 mm
• Measures the width, height, and depth of can seams.
-
105-105 | Outside Micrometer with Anvil Extension Collars 700-800 mm | MITUTOYO
Order No. 105-105
Outside Micrometer with Anvil Extension Collars
Range : 700-800 mm
MITUTOYO
• Adjustable measuring range with extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-106 | Caliper Type Micrometers Series 143, 125-150 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-106
Range : 125-150 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-131 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 150-175 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-131
Range : 150-175 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
124-180 | Gear Tooth Micrometer, 175-200 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-180
Range : 175-200 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
111-215 | Spline Micrometer, 0-25 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-215
Range. : 0-25 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
