Mitutoyo

Groove Micrometers – Non-Rotating Spindle Series 146

ไมโครมิเตอร์วัดแบบตัว Groove

Order No. 146-224

Flange : 12.7 mm

• Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.
• Two-directional ratchet stop.
• For ID and OD (except for 0 – 25 mm) measurement, a master gage is required for adjusting the reference point.
• Non-rotating spindle.

Groove Micrometers – Non-Rotating Spindle Series 146

ไมโครมิเตอร์วัดแบบตัว Groove

Order No. 146-225

Flange : 12.7 mm

• Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.
• Two-directional ratchet stop.
• For ID and OD (except for 0 – 25 mm) measurement, a master gage is required for adjusting the reference point.
• Non-rotating spindle.

Groove Micrometers – Non-Rotating Spindle Series 146

ไมโครมิเตอร์วัดแบบตัว Groove

Order No. 146-231

Flange : 0.25 mm

Groove Micrometers – Non-Rotating Spindle Series 146

ไมโครมิเตอร์วัดแบบตัว Groove

Order No. 146-232

Flange : 0.5 mm

Groove Micrometers – Non-Rotating Spindle Series 146

ไมโครมิเตอร์วัดแบบตัว Groove

Order No. 146-233

Flange : 0.5 mm

Groove Micrometers – Non-Rotating Spindle Series 146

ไมโครมิเตอร์วัดแบบตัว Groove

Order No. 146-234

Flange : 0.5 mm

Groove Micrometers – Non-Rotating Spindle Series 146

ไมโครมิเตอร์วัดแบบตัว Groove

Order No. 146-235

Flange : 0.5 mm

SMALL HOLE GAGE  – SERIES 154

• Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole

Order No. 154-102

SMALL HOLE GAGE  – SERIES 154

• Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole

Order No. 154-103

SMALL HOLE GAGE  – SERIES 154

• Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole

Order No. 154-104

SMALL HOLE GAGE SET – SERIES 154

• Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole

Order No. 154-902

TELESCOPIC GAGE  – SERIES 155

Order No. 155-127

• A spring-loaded plunger expands within a bore (or groove) and is locked in place allowing measurement of diameter (or width) with an outside micrometer after extraction.