- Sort by Popularity
- Display 36 Products per page
-
293-147-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 50 – 75 mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 50 – 75 mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-247-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 75-100 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-677-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 1-2.2″ | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-677-20
Range : 1-2.2″• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-304 | Outside Micrometer Series 102, 75-100 mm, 0.01mm | MITUTOYO
Outside Micrometer Series 102
Range : 75-100 mm
Graduation : 0.01 mm
Order No. : 102-304
• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-162 | Outside Micrometer Series 103, 625-650 mm | Mitutoyo
Outside Micrometer Series 103
Range 625-650 mm
Graduation 0.01 mm
Order No. 103-162
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
193-901 | Digit outside Micrometer Series 193, 0-75 mm (3 pcs.) | MITUTOYO
Digit Outside Micrometer Series 193
Range : 0-75 mm (3 pcs.)
Order No. : 193-901
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
146-123 | Groove Micrometers -Rotating Spindle Series 146 – 25-50 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometer – Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-123
Flange : 12.7 mm
-
422-233-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-233-30
Range : 75-100 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
122-141-10 | Blade Micrometer – non rotating spindle type (Carbide tip) – Series 122 | MITUTOYO
Blade Micrometer – non rotating spindle type (Carbide Tip) – Series 122
Range: 0-25 mm
Order No.: 122-141-10
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
105-417 | Outside Micrometer with Anvil Extension Collars 1900-2000 mm | MITUTOYO
Order No. 105-417
Outside Micrometer with Anvil Extension Collars
Range : 1900-2000 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-110 | Caliper Type Micrometers Series 143, 225-250 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-110
Range : 225-250 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-128 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 75-100 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-128
Range : 75-100 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional.
