- Sort by Popularity
- Display 12 Products per page
-
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
208062 | Spindle Attachment Tip Spline for Micrometer Anvils 6.35mm | MITUTOYO
SPINDLE ATTACHMENT TIP SPLINE
Order No. 208062
Description
These spindle attachment tips give you an economical way to adapt a micrometer spindle for different tasks.
They offer the following benefits:- You can use the tips on a micrometer spindle as an economical adaptation for particular measurement applications.
- They can also be mounted on micrometer anvils ø 6.35 mm.
- The measuring range changes when a spindle attachment tip is mounted.
-
570-322 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – WITH ERGONOMIC BASE, 0-300mm | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
WITH ERGONOMIC BASE
Order No.: 570-322
Range: 0-300 mm
Description:
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- It comes with large and smooth-acting slider hand wheel
- A carbide-tipped scriber is provided.
- SPC data output.
-
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
157-903 | OPTICAL PARALLELS – SERIES 157 | MITUTOYO
OPTICAL PARALLELS SET, METRIC 0-25 mm
Order No. 157-903
Description
• Designed to inspect parallelism and flatness of measuring faces of micrometers.
• Each set consists of 4 sizes to aid in testing parallelism at various angular positions of the micrometer spindle. -
293-182-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed Inch/Metric, 2-3″ | MITUTOYO
Digital Micrometer QuantuMike IP65
Inch/Metric, 2-3″• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-333-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Inch / Metric
Range : 3-4″ mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-585 | Digimatic Outside Micrometer Series 293, 375-400 mm | MITUTOYO
Digimatic Outside Micrometer Series 293
Range : 375-400 mm
Order No. 293-584
• Constant measuring force: ratchet stop
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as
Excel.
• Measuring faces: Carbide. -
102-702 | Ratchet Thimble Micrometer Series 102 – Outside Micrometer, 25-50 mm, 0.01 mm | MITUTOYO
Ratchet Thimble Micrometer – Outside Micrometer
Range : 25-50 mm
Graduation : 0.01 mm
Order No. 102-702• More accurate in easy one-handed operation.
• Ratchet function works both from the thimble and the speeder.
• Rotating the thimble/speeder causes the ratchet mechanism to operate and apply a constant measuring force to the workpiece.
• Heat-insulated frame.
• Measuring faces: Carbide. -
103-166 | Outside Micrometer Series 103, 725-750 mm | Mitutoyo
Outside Micrometer Series 103
Range 725-750 mm
Graduation 0.01 mm
Order No. 103-166
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-203 | Indicator Type Micrometer Series 107, 50-75 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 50-75 mm
Order No. : 107-203
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-222 | Groove Micrometers -Non-Rotating Spindle Series 146 – 0-25 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometers – Non-Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-222
Flange : 12.7 mm
• Flanged spindle and anvil for measuring width and location of grooves inside bores and tubes.
• Two-directional ratchet stop.
• For ID and OD (except for 0 – 25 mm) measurement, a master gage is required for adjusting the reference point.
• Non-rotating spindle.
