- Sort by Popularity
- Display 12 Products per page
-
368-171 | Holtest – Three-Point Internal Micrometer Holtest 62-75mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-171
Range. 62-75 mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
368-779 | Holtest (Type II) – 3 Point Internal Micrometer 225-250mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST (TYPE II) MITUTOYO
Order No. : 368-779
Range: 225-250mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
568-472 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 3-3.5″ | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES
Range : 3-3.5″
Order No. : 568-472
Description :
This is a individual unit Three-Point Digimatic Snap Open Bore Gauge.
It offers you the following benefits:- It enables you to take measurements easily and quickly.
- Titanium-coated measuring pins gives you excellent durability and impact resistance.
- 330° rotatable display unit also gives you easy reading at any angle.
- GO/NG tolerance judgement function.
-
133-154 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 325-350mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-154
Range : 325-350mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
337-102 | TUBULAR INSIDE MICROMETERS SERIES 337 – EXTENSION ROD TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 337 – EXTENSION ROD TYPE
Order No. : 337-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
145-189 | INSIDE MICROMETER SERIES 145 – CALIPER TYPE, 100-125mm | MITUTOYO
INSIDE MICROMETER SERIES 145 – CALIPER TYPE
Order No. 145-189
Range: 100-125mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
526-160-11 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 1.50 – 3.95mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-160-11
Range: 1.50 – 3.95 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
511-723-20 | BORE GAGE SERIES 511, 50-150mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-723-20
Range: 50-150 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
511-815-20 | BORE GAGE SERIES 511 – WITH MICROMETER HEAD, 150-250mm | MITUTOYO
BORE GAGE SERIES 511 – WITH MICROMETER HEAD
Order No.: 511-815-20
Range: 150-250 mm
Description:
• This series includes models for measuring ø60 to 800 mm inside diameters.
• The micrometer head is used for dimensional setting. The dimension can be easily changed without replacing the anvil and washer.
• The contact point has a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
177-236 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-236
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-314 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-314
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
500-785 | SuperCaliper SERIES 500 – NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER | MITUTOYO
SuperCaliper SERIES 500
NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER
Brand : MITUTOYO
Order No. : 500-785
Range : 0-68″
Description :
This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
- Waterproof reliability
- Impact resistance of the display unit for improved usability in workshop conditions
- It operates in only 60 lux ambient lighting.
- Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
- Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid
