- Sort by Popularity
- Display 12 Products per page
-
133-143 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 50-70mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-143
Range : 50-75mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
Disk Micrometers SERIES 369,227,169 Non Rotating Spindle Type Mitutoyo
Disk Micrometers SERIES 369,227,169 Non Rotating Spindle Type Mitutoyo
-
552-302-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-450mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-302-10
Range : 0-450 mm
Description :
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
Precision Square Level ระดับน้ำตั้งเครื่องแบบสี่เหลี่ยม RIKEN
Precision Square Level ระดับน้ำตั้งเครื่องแบบสี่เหลี่ยม RIKEN
-
154-101 | SMALL HOLE GAGE เกจวัดรูใน- SERIES 154 | MITUTOYO
SMALL HOLE GAGE – SERIES 154
- Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole
Order No. 154-101
-
293-147-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 50 – 75 mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 50 – 75 mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-247-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 75-100 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-677-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 1-2.2″ | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-677-20
Range : 1-2.2″• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-304 | Outside Micrometer Series 102, 75-100 mm, 0.01mm | MITUTOYO
Outside Micrometer Series 102
Range : 75-100 mm
Graduation : 0.01 mm
Order No. : 102-304
• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-162 | Outside Micrometer Series 103, 625-650 mm | Mitutoyo
Outside Micrometer Series 103
Range 625-650 mm
Graduation 0.01 mm
Order No. 103-162
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
193-901 | Digit outside Micrometer Series 193, 0-75 mm (3 pcs.) | MITUTOYO
Digit Outside Micrometer Series 193
Range : 0-75 mm (3 pcs.)
Order No. : 193-901
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
146-123 | Groove Micrometers -Rotating Spindle Series 146 – 25-50 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometer – Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-123
Flange : 12.7 mm
