- Sort by Default Order
- Display 12 Products per page
-
573-717-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – CENTER-TO-CENTER TYPE, 10.1-300mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
CENTER-TO-CENTER TYPE
Order No.: 573-717-20
Range: 10.1-300 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
573-719-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – EDGE-TO-CENTER TYPE, 10.1-300mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
EDGE-TO-CENTER TYPE
Order No.: 573-719-20
Range: 10.1-300 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
573-721-20 | POINT CALIPER SERIES 573-ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0-6″ | MITUTOYO
POINT CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-721-20
Range : 0-6″
Description :
These point calipers have extra fine ground measuring jaws. They offer you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
573-725-20 | POINT CALIPER SERIES 573-ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0-6″ | MITUTOYO
POINT CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-725-20
Range : 0-6″
Description :
These point calipers have extra fine ground measuring jaws. They offer you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
573-734-20 | BLADE TYPE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-6″ | MITUTOYO
BLADE TYPE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-734-20
Range : 0-6″
Description :
These blade calipers have thin measuring jaws. They offer you the following benefits:
- The thin blade-type jaws fit into very small grooves making it much easier for you to obtain many previously difficult outside measurements.
- The outside measuring faces are carbide.
-
573-742-20 | ABSOLUTE INSIDE CALIPER SERIES 573, KNIFE EDGE TYPE, 0.4-8″ | MITUTOYO
ABSOLUTE INSIDE CALIPER SERIES 573
KNIFE EDGE TYPE
Order No.: 573-742-20
Range : 0.4-8″
Description :
These inside calipers enable measurements inside a groove
They offer you the following benefits:- Specially designed for measurements in hard-to-reach places.
-
573-745-20 | ABSOLUTE INSIDE CALIPER SERIES 573, INSIDE GROOVE TYPE, 0.404-6.4″ | MITUTOYO
ABSOLUTE INSIDE CALIPER SERIES 573
INSIDE GROOVE TYPE
*Includes the offsetting function, which indicates the actual measurement value.
Order No.: 573-745-20
Range : 0.404-6.4″
Description :
These inside calipers enable measurements inside a groove
They offer you the following benefits:- Specially designed for measurements in hard-to-reach places.
-
573-746-20 | ABSOLUTE INSIDE CALIPER SERIES 573, POINT JAW TYPE, 0.804-6.8″ | MITUTOYO
ABSOLUTE INSIDE CALIPER SERIES 573
INSIDE GROOVE TYPE
*Includes the offsetting function, which indicates the actual measurement value.
Order No.: 573-746-20
Range : 0.804-6.8″
Description :
These inside calipers enable measurements inside a groove
They offer you the following benefits:- Specially designed for measurements in hard-to-reach places.
-
573-751-20 | NECK CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-6″ | MITUTOYO
NECK CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No.: 573-751-20
Range : 0-6″
Description :
• Can measure wall thickness inside bores and recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable. -
573-752-20 | NECK CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-6″ | MITUTOYO
NECK CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
(Point jaw type)
Order No.: 573-752-20
Range : 0-6″
Description :
• Can measure wall thickness inside bores and recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable. -
573-761-20 | TUBE THICKNESS CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPE, 0-6″ | MITUTOYO
TUBE THICKNESS CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPE
Order No. 573-761-20
Range : 0-6″
Description :
• The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.
• Allows integration into statistical process control and measurement systems for
models with measurement data output connector. -
611506-021 | Individual Metric Rectangular Gauge Blocks – 0.5mm | Mitutoyo
Individual Metric Rectangular Gauge Blocks | MITUTOYO
Order No. : 611506-021
Length : 0.5 mm
Description :
This Grade 0 Gauge Block with Inspection Certificate offers you the following benefits:
- Outstanding dimensional stability: Mitutoyo steel gauge blocks are made exclusively from artificially aged material.
- High gauge reliability: The gauge blocks can be used as a standard for a long time due to their high dimensional stability.
- The maximum permitted length changes to gauge blocks over a year are defined in EN ISO 3650. Mitutoyo high-quality gauge blocks easily meet these and all other requirements.
- Steel gauge blocks are excellent for use as a standard because of the low measurement uncertainty that can be achieved when using them.
- Mitutoyo steel gauge blocks have top-quality surfaces, guaranteeing high wringing force.
