- Sort by Popularity
- Display 12 Products per page
-
GEAR TOOTH GAUGES เกจวัดเฟือง ⅼ FUJI TOOL
GEAR TOOTH GAUGES FUJI TOOL เกจวัดเฟือง
This involute gear tooth gauge provides quick and easy way to determine the diametral pitch and module pitch (metric) on a gear.
Feature
With this involutes gear tooth gauge, it is easy to determine diametral pitch and module pitch (metric).
S model and L model are for the use of small and large pitch respectively.
The pressure angle of these gauges are 14 1/2° and 20°Meterial : SPCC
-
182-533-10 | WORKING STANDARD SCALES SERIES 182 | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are available in various types and sizes to suit to your application.
• Ideal for checking magnification accuracy of profile projectors and microscopes, and the table feeding accuracy of measuring equipment.
-
515-720 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
515-115 | RISER BLOCKS Series 515 – POTIONAL ACCESSORIES | MITUTOYO
• The measuring range of a Height Master can be extended by using riser blocks.
• They can also be used on Square Master models 311-215 and 311-225.
-
311-111 | HIGH PRECISION SQUARE SERIES 311 | MITUTOYO
• The High-Precision Square gage is used for inspecting the travel straightness and axial perpendicularity of moving elements on equipment, such as machine tools and CMMs.
• Four precision-lapped reference surfaces, finished using ultra-precision technology built on our experience in gauge blocks.
• Better than 1 μm/300 mm straightness and perpendicularity of each (four) reference surface. In addition, front and back faces are accurate to better than 5 μm/300 mm.
• Three nominal sizes are available (90×110, 160×210 and 260×310 mm) so that you can select the size that best suits the application.
-
182-512-10 | WORKING STANDARD SCALES SERIES 182 | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are available in various types and sizes to suit to your application.
• Ideal for checking magnification accuracy of profile projectors and microscopes, and the table feeding accuracy of measuring equipment.
-
CONTOUR GAUGES คอนทัวร์เกจ หรือเกจคัดลอกขนาดรูปร่างชิ้นงาน ⅼ FUJI TOOL
CONTOUR GAUGES คอนทัวร์เกจ หรือเกจคัดลอกขนาดรูปร่างชิ้นงาน FUJI TOOL
FEATURES
Used to check convex or concave quickly and easily. Ideal for checking molds or dies.
Body : Steel
Wire : Stainless SteelMeasuring method (Use the gauge as shown below)
-
182-534-10 | WORKING STANDARD SCALES SERIES 182 | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are available in various types and sizes to suit to your application.
• Ideal for checking magnification accuracy of profile projectors and microscopes, and the table feeding accuracy of measuring equipment.
-
515-110 | AUXILIARY BLOCK KIT SERIES 515 – for BORE GAGE – OPTIONAL ACCESSORIES | MITUTOYO
• Used for efficient zero-setting of dial bore gages and tubular inside micrometers (18 – 150 mm) on a Height Master.
-
311-215 | SQUARE METER SERIES 311 – Squareness/Straightness Measuring | MITUTOYO
• Squareness (perpendicularity) and straightness measurements can be performed accurately and efficiently by just moving a lever. Use the vertical motion handle on the rear of the main unit for operation.
• Highly accurate measurement of squareness and straightness is available by calibrating a square as a master using the built-in perpendicularity adjustment mechanism. Prepare a square to be used for accuracy check/adjustment separately.
• Sliding force: Approx. 2 to 5 N
-
182-513-10 | WORKING STANDARD SCALES SERIES 182 | MITUTOYO
• High-precision glass scales manufactured under Mitutoyo’s leading-edge Linear Scale production technology. They are available in various types and sizes to suit to your application.
• Ideal for checking magnification accuracy of profile projectors and microscopes, and the table feeding accuracy of measuring equipment.
