- Sort by Popularity
- Display 36 Products per page
-
112-213 | Point Micrometer with Carbide Tip – Series 112, 0-25 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-213
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
102-304 | Outside Micrometer Series 102, 75-100 mm, 0.01mm | MITUTOYO
Outside Micrometer Series 102
Range : 75-100 mm
Graduation : 0.01 mm
Order No. : 102-304
• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-162 | Outside Micrometer Series 103, 625-650 mm | Mitutoyo
Outside Micrometer Series 103
Range 625-650 mm
Graduation 0.01 mm
Order No. 103-162
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
147-304 | Hub Micrometer Series 147 – ไมโครมิเตอร์สอดวัดแกนใน | Mitutoyo
Hub Micrometer Series 147
ไมโครมิเตอร์สอดวัดแกนใน
Order No. 147-304
Range : 75-100 mm
• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
105-410 | Outside Micrometer with Anvil Extension Collars 1200-1300 mm | MITUTOYO
Order No. 105-410
Outside Micrometer with Anvil Extension Collars
Range : 1200-1300 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-110 | Caliper Type Micrometers Series 143, 225-250 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-110
Range : 225-250 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-135 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 250-275 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-135
Range : 250-275 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
124-195 | Gear Tooth Micrometer, 275-300 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-195
Range : 275-300 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
111-118 | Spline Micrometer, 75-100 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-118
Range. : 75-100 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
114-161 | V-Anvil Micrometer – 3 Flute, 1-15 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 114-161
Range : 1-15 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-140-10 | Outside Micrometer Series 103, 75-100 mm, 0.01mm | Mitutoyo
Outside Micrometer Series 103
Range 75 – 100 mm
Graduation 0.01 mm
Order No. 103-140-10
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-173 | Outside Micrometer Series 103, 900-925 mm | Mitutoyo
Outside Micrometer Series 103
Range 900-925 mm
Graduation 0.01 mm
Order No. 103-173
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
