- Sort by Default Order
- Display 24 Products per page
-
133-143 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 50-70mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-143
Range : 50-75mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
113-103 | Limit Micrometer Series 113, 25-50 mm | Mitutoyo
Limit Micrometer : Series 113
Range : 25-50 mm
Order No. 113-103
• Dual-spindle design enables use as a GO/±NG gage by setting upper and lower limits.
• Measuring faces: Carbide. -
105-103 | Outside Micrometer with Anvil Extension Collars 500-600 mm | MITUTOYO
Order No. 105-103
Outside Micrometer with Anvil Extension Collars
Range : 500-600 mm
MITUTOYO
• Adjustable measuring range with extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
169-101-10 | Paper Thickness Micrometer – Series 169 -Non Rotating Spindle Type, 0-25 mm | MITUTOYO
Paper Thickness Micrometer – Series 169 -Non Rotating Spindle Type
ไมโครมิเตอร์วัดกระดาษ
Order No. 169-101-10
Rnage : 0-25 mm
• For paper thickness measurement.
• Non-rotating spindle.
• Anvil diameter 14.3 mm (without recess)
• Equipped with Ratchet Stop for constant measuring force. (8.02±0.8 N) -
342-251-30 | Point Micrometer – Series 342, 0-25 mm | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-251-30
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force. -
293-140-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 0-25mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble.
Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.
-
293-678-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 2-3.2″ | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-678-20
Range : 2-3.2″• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
326-251-30 | Screw Thread Micrometer- Interchangeable Anvil/Spindle Tip Type 0-25 mm | MITUTOYO
Screw Thread Micrometers
Order No. 326-251-30
Range : 0-25 mm
• Use by installing a suitable interchangeable anvil/spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65,waterproof Digimatic screw thread micrometer with interchangeable anvil/spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils/spindle tips are optional. -
119-202 | Sheet Metal Micrometer – Series 119 | Mitutoyo
Sheet Metal Micrometer – Series 119
Range : 0-25 mm
Order No. : 119-202
• Large diameter dial model enables easy and quick measurement of sheet metal thickness.
• Adjustable anvil.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
389-261-30 | Sheet Metal Micrometer IP65, 0-25mm, Spherical Anvil | MITUTOYO
SHEET METAL MICROMETER – SERIES 389
This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.
Order No. 389-261-30
Range : 0-25 mm
Measuring Surface : Spherical / Flat
• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force. -
154-101 | SMALL HOLE GAGE เกจวัดรูใน- SERIES 154 | MITUTOYO
SMALL HOLE GAGE – SERIES 154
- Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole
Order No. 154-101
