- Sort by Popularity
- Display 24 Products per page
-
468-266 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-266
Range : 0.8-1″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
468-987 | Digimatic Holtest – 3-point Internal Micrometers Set (Non-Interchange-Head Set) – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO
Non-Interchange-Head Set
Order No. : 468-987
Range : 0.5″ – 1″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-912 | Holtest – Three-Point Internal Micrometer Holtest Set – 12-20mm(2 pcs.) | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST SET | MITUTOYO
Order No. 368-912
Range: 12-20mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering. -
568-368 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 30-40mm | MITUTOYO
568-368 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 30-40mm | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES
Range : 30-40mm
Order No. : 568-368
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
568-967 | ABSOLUTE BOREMATIC SERIES 568 – INTERCHANGEABLE-HEAD BORE GAGE STES | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
INTERCHANGEABLE-HEAD BORE GAGE STES
Order No. : 568-967
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
137-204 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE, 50-1000mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE
Order No.: 137-204
Range : 50-1000mm
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
145-219 | INSIDE MICROMETER SERIES 145 – CALIPER TYPE, 250-275mm | MITUTOYO
INSIDE MICROMETER SERIES 145 – CALIPER TYPE
Order No. 145-219
Range: 250-275mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
526-153-21 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 3.70 – 7.30mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
บอร์เกจ – สำาหรับรูขนาดเล็กมาก
Order No.: 526-153-21
Range: 3.70 – 7.30 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø1 to 7 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
511-715-20 | BORE GAGE SERIES 511, 160-250mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-715-20
Range: 160-250 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
511-426-20 | BORE GAGES SERRIES 511 – for BLIND HOLES, 35-60mm | MITUTOYO
BORE GAGE SERIES 511 FOR BLIND HOLES
Order No.: 511-426-20
Range: 35-60mm
Description :
• Capable of ID (inside diameter) measurement close to the bottom of a hole.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• Optional Extension Rods can be attached for measuring deep holes. -
177-132 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-132
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-427 | SETTING RINGS SERIES 177 – CERA | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-427
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.)
