- Sort by Default Order
- Display 24 Products per page
-
147-301 | Hub Micrometer Series 147 – ไมโครมิเตอร์สอดวัดแกนใน | Mitutoyo
Hub Micrometer Series 147
ไมโครมิเตอร์สอดวัดแกนใน
Order No. 147-301
Range : 0-25 mm
• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
293-100-10 | HIGH-ACCURACY DIGIMATIC MICROMETER SERIES 293 | MITUTOYO
HIGH ACCURACY DIGITAL MICROMETER 0-25mm
ABSOLUTE DIGIMATIC SERIES 293
Order No. 293-100-10
-
324-251-30 | Gear Tooth Micrometer IP65, 0-25 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 324-251-30
Range : 0-25 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• IP65 Digimatic gear tooth micrometers.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Ball anvil / spindle tips: optional. -
323-250-30 | Disk Micrometer Series 323, 0-25 mm, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-250-30
Range : 0-25mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
468-161 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT
INTERNAL MICORMETER
Order No. : 468-161
Range : 6-8 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance. -
523-121 | Dial Snap Meter Series 510, 0-25 mm | MITUYOYO
Dial Snap Meter Series 510
Range : 0-25 mm
Order No. : 523-121
• Suitable for quick pass / fail inspection of mass-produced components.
• Greatly improved accuracy: indication accuracy and graduation of 1 μm.
• IP protection level: 54, coolant-splash resistant during grinding process.
• Hard-coated crystal: enhanced oil and scratch resistance. -
342-371-30 | Crimp Height Micrometer, 0-0.8″ | MITUTOYO
CRIMP HEIGHT MICROMETER
Range : 0-0.8″
Order No. 342-371-30
• Measures the height of crimp contacts.
• Equipped with Ratchet Stop for constant measuring force.
• IP65 water / dust protection (Digimatic model). -
147-103 | Can Seam Micrometers Series 147 – ไมโครมิเตอร์วัดกระป๋อง | MITUTOYO
Can Seam Micrometers Series 147
ไมโครมิเตอร์วัดกระป๋อง
Order No. : 147-103
Range 0-13 mm
• Measures the width, height, and depth of can seams.
-
343-250-30 | Caliper Type Micrometers Series 343, 0-25 mm | MITUTOYO
Caliper Type Micrometers Series 343
Order No. 343-250-30
Range : 0-25 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
511-803 | BORE GAGE SERIES 511 – WITH MICROMETER HEAD, 60-100mm | MITUTOYO
BORE GAGE SERIES 511 – WITH MICROMETER HEAD
Order No.: 511-803
Range: 60-100 mm
Description:
• This series includes models for measuring ø60 to 800 mm inside diameters.
• The micrometer head is used for dimensional setting. The dimension can be easily changed without replacing the anvil and washer.
• The contact point has a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
511-761 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 18-35mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-761
Range: 18-35 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand.
