- Sort by Default Order
- Display 12 Products per page
-
527-402 | DEPTH GAGE SERIES 527, HOOK END TYPE, 0-200mm | MITUTOYO
DEPTH GAGE SERIES 527 – HOOK END TYPE
Order No. : 527-402
Depth Range.: 10-200 mm
Hook Range : 0-200 mm
Description :
This hook type vernier depth gauge offers you the following benefits:
- The end of the beam is hook-shaped so you can take depth and thickness measurements of a projected portion or lip in a hole, as well as standard depth measurements.
- Fine adjustment models are available.
-
527-403 | DEPTH GAGE SERIES 527, HOOK END TYPE, 0-300mm | MITUTOYO
DEPTH GAGE SERIES 527 – HOOK END TYPE
Order No. : 527-403
Depth Range.: 10-300 mm
Hook Range : 0-300 mm
Description :
This hook type vernier depth gauge offers you the following benefits:
- The end of the beam is hook-shaped so you can take depth and thickness measurements of a projected portion or lip in a hole, as well as standard depth measurements.
- Fine adjustment models are available.
-
527-411 | DEPTH GAGE SERIES 527, HOOK END TYPE, 0-150mm | MITUTOYO
DEPTH GAGE SERIES 527 – HOOK END TYPE
Order No. : 527-411
Depth Range.: 10-150 mm
Hook Range : 0-150 mm
Description :
This hook type vernier depth gauge offers you the following benefits:
- The end of the beam is hook-shaped so you can take depth and thickness measurements of a projected portion or lip in a hole, as well as standard depth measurements.
- Fine adjustment models are available.
-
527-412 | DEPTH GAGE SERIES 527, HOOK END TYPE, 0-200mm | MITUTOYO
DEPTH GAGE SERIES 527 – HOOK END TYPE
Order No. : 527-412
Depth Range.: 10-200 mm
Hook Range : 0-200 mm
Description :
This hook type vernier depth gauge offers you the following benefits:
- The end of the beam is hook-shaped so you can take depth and thickness measurements of a projected portion or lip in a hole, as well as standard depth measurements.
- Fine adjustment models are available.
-
527-413 | DEPTH GAGE SERIES 527, HOOK END TYPE, 0-300mm | MITUTOYO
DEPTH GAGE SERIES 527 – HOOK END TYPE
Order No. : 527-413
Depth Range.: 10-300 mm
Hook Range : 0-300 mm
Description :
This hook type vernier depth gauge offers you the following benefits:
- The end of the beam is hook-shaped so you can take depth and thickness measurements of a projected portion or lip in a hole, as well as standard depth measurements.
- Fine adjustment models are available.
-
530-100 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-100mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-100
Range : 0 – 100 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-102 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-102
Range : 0 – 150 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-104 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-104
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-108 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-108
Range : 0 – 200 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-109 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-109
Range : 0 – 300 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-114 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm/0-8″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-114
Range : 0-200mm/0-8″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-115 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm/0-12″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
Order No. 530-115
Range : 0-300mm/0-12″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
