- Sort by Popularity
- Display 36 Products per page
-
167-132 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-132
Length : 800 mm
-
167-389 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-389
Length : 1625 mm
-
167-278 | Setting Standard for Screw Thread Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167
Used for accurately setting screw thread micrometers at the start or end of the measuring range.
Whitworth θ = 55°
Order No. 167-278
-
350-361-30 | Digimatic Micrometer Head – Series 350 | MITUTOYO
DIGIMATIC MICROMETER HEAD – SERIES 350
Order no. 350-361-30
Stroke: 1″
Description :
• Equipped with digital display and output.
• 350-28X-30, 350-261-30, 350-38X-30 and 350-361-30 are protection grade IP65, water-proof Digimatic micrometer heads.
• Digimatic models can be easily integrated into statistical process control and measurement systems. -
148-503 | Micrometer Heads – Small Thimble Dimeter Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL THIMBLE DIMETER STANDARD TYPE – SERIES 148
Order no. 148-503
Range: 0-13mm
Description :
• Measuring range of 13 mm.
• The thimble can be set to zero at any position by loosening the setscrew. -
151-225-10 | Micrometer Heads – Medium-size standard Type with 8mm Diameter Spindle – SERIES 151 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE
With 8mm Diameter Spindle – SERIES 151
MITUTOYO
Order no. 151-225-10
Range: 0-25mm
Description :
• Larger spindle (ø8 mm) for heavy-duty applications (normally ø6.35 mm).
-
148-245 | Micrometer Heads – Fine Spindle Feed of 0.1mm/rev – SERIES 148 | MITUTOYO
MICROMETER HEAD – FINE SPINDLE FEED OF 0.1mm/rev – SERIES 148
MITUTOYO
Order no. 148-245
Range: 0-5mm
Description :
- Highly accurate 0.1 mm pitch thread is only one-fifth of that used for a standard-pitch head (0.5 mm).
- External dimensions are compatible with standard 0.5 mm pitch heads.
-
303574 | Fixture for Micrometer Head | MITUTOYO
FIXTURE FOR MICROMETER HEAD | MITUTOYO
Order No. : 303574
Description :
Mitutoyo offers various types of fixture designed for micrometer heads, which you can use for a wide range of applications, that have the following benefits:
- These fixtures are high quality and durable, manufactured from nickel-plated cast iron.
- Two types of fixture for micrometer heads are available, depending on whether the head has a plain stem or is a clamp nut type.
-
468-180 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-180
Range : 250-275 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
468-980 | Digimatic Holtest – 3-point Internal Micrometers Set (Interchange-Head Set) – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO
Interchange-Head Set
Order No. : 468-980
Range : 4-8″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-178 | Holtest – Three-Point Internal Micrometer Holtest 200-225mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-178
Range. 200-225mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
368-994 | Holtest (Type II) – 3 Point Internal Micrometer Set 100-200mm (4 pcs.) | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST SET (TYPE II) MITUTOYO
Order No. : 368-994
Range: 100-200mm
Description
• Holtests type II is equipped with contact points of alloy steel and has the same accuracy as the titanium model.
• Constant-force device allows stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).
