- Sort by Date
- Display 12 Products per page
-
515-720 | CHECK MASTER SERIES 515 | MITUTOYO
• Designed to check the accuracy of table movements of machine tools and calibrate CMMs. Permanently wrung stack of gauge blocks is housed in a rigid frame.
• Can be used in either vertical or horizontal orientation.
-
500-776 | SuperCaliper SERIES 500 – NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER | MITUTOYO
SuperCaliper SERIES 500
NO BATTERY OR ORIGIN RESET NEEDED FOR IP67 DIGITAL CALIPER
Brand : MITUTOYO
Order No. : 500-776
Range : 0-150 mm
Description :
This IP67 solar-powered digimatic SuperCaliper with ABSOLUTE system is a robust, high performance model and offers you the following benefits:
- Waterproof reliability
- Impact resistance of the display unit for improved usability in workshop conditions
- It operates in only 60 lux ambient lighting.
- Even if the illumination is temporarily less than 60 lux measuring can be performed by charging a super capacitor.
- Excellent resistance against water and dust (IP67 protection level) enabling you to use it in machining situations that include splashing coolant fluid
-
339-102 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 8-9″ | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-102
Range : 8-9″
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
137-013 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit) | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit)
CARBIDE-TIPPED
Order No. 137-013
Range : 50-63 mm
Description :
• Micrometer head for Extension-Rod Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
339-101 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 200-225 mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-101
Range : 200-225 mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
133-143 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 50-70mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-143
Range : 50-75mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
139-001 | TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit) | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit)
Order No. 137-019
Range : 50-63 mm
Description :
• Micrometer head for Extension-Pipe Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings, CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
141-001 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-001
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
345-250-30 | INSIDE MICROMETER SERIES 345 – CALIPER TYPE, 5-30mm | MITUTOYO
INSIDE MICROMETER SERIES 345 – CALIPER TYPE
Order No. 345-250-30
Range: 5-30 mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
468-161 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT
INTERNAL MICORMETER
Order No. : 468-161
Range : 6-8 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance. -
511-803 | BORE GAGE SERIES 511 – WITH MICROMETER HEAD, 60-100mm | MITUTOYO
BORE GAGE SERIES 511 – WITH MICROMETER HEAD
Order No.: 511-803
Range: 60-100 mm
Description:
• This series includes models for measuring ø60 to 800 mm inside diameters.
• The micrometer head is used for dimensional setting. The dimension can be easily changed without replacing the anvil and washer.
• The contact point has a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand.
