- Sort by Popularity
- Display 12 Products per page
-
500-752-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-752-20
Range : 0-6″
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-168-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
*Carbide-tipped jaws for outside and inside measurement*
Order No. : 500-168-30
Range : 0-12″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
530-312 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*High accuracy model: ±0.03mm
Order No. 530-312
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
551-341-10 | ABSOLUTE DIGIMATIC CALIPER 551 SERIES – WITH NIB STYLE AND STANDARD JAWS 0-12″/-0-300mm | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER 551 SERIES
WITH NIB STYLE AND STANDARD JAWS
Order No.: 551-341-10
Range : 0-12″/-0-300mm
Description :
This is a Digimatic caliper with nib-style and standard jaws.
It offers you the following benefits:- Knife-shaped measuring surfaces allow you to take outside measurements.
- Rounded measuring surfaces enable you to measure inside dimensions.
- ABSOLUTE System delivers reliable measurements.
-
552-165-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES – with Ceramic Jaws, 0-18″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with Ceramic Jaws
Order No. : 552-165-10
Range : 0-18″
Description :
This is a lightweight standard model of Digimatic caliper with ceramic jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
160-106 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-40″/0-1000mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-106
Range: 0-40″ / 0-1000 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
536-106 | OFFSET CENTERLINE CALIPER SERIES 536, 10.1-200mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 536
Order No.: 536-106
Range : 10.1-200 mm
Description :
This Offset Centerline Caliper enables you to measure center-to-center distance and offers you the following benefits:
- Center-to-center measurements for holes on the same plane or between offset planes
- Edge to center measurements
-
536-151 | NECK CALIPER SERIES 536 – VERNIER TYPE, 0-150mm | MITUTOYO
NECK CALIPER SERIES 573
VERNIER TYPE
Order No.: 536-151
Range : 0-150 mm
Description :
• Can measure wall thickness inside bores and recesses.
-
514-108 | VERNIER HEIGHT GAGE SERIES 506 – STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE, 0-1000mm | MITUTOYO
VERNIER HEIGHT GAGE SERIES 506
STANDARD HEIGHT GAGE WITH ADJUSTABLE MAIN SCALE
Order No. 514-108
Range : 0 – 1000mm
Description :
This vernier height gauge offers you the following benefits:
- You can take accurate and fast readings thanks to the satin chrome finished main and vernier scales.
- A carbide-tipped scriber is provided.
-
329-251-30 | DEPTH MICROMETER SERIES 329 – INTERCHANGEABLE ROD TYPE, 0-300 mm | MITUTOYO
DEPTH MICROMETER SERIES 329
INTERCHANGEABLE ROD TYPE
Order No. : 329-251-30
Range : 0-300 mm
Description :
This interchangeable rod type micrometer can be used for wide range measurements.
It offers you the following benefits:- ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement
- The ratchet stop provides constant measuring force.
- Measuring rod lock.
-
981781 | INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES, 250-275mm | MITUTOYO
INTERCHANGEABLE ROD – OPTIONAL ACCESSORIES
Order No. 981781
Range: 250-275 mm
-
571-264-20 | DEPTH GAGE SERIES 571 – HOOK END TYPE, 0-6″/0-150mm | MITUTOYO
DEPTH GAGE SERIES 571 – HOOK END TYPE
Order No. 571-264-20
Depth Range: 0.4-6.4″
Hook Range: 0-6″
Description :
This Digital Depth Gauge is IP67 and offers you the following benefits:
- It has excellent resistance against water and dust (IP67 protection level) enabling you to use it in situations that include coolant fluid.
- Direct reading by pressing the OFFSET function, which compensates for the 10 mm width of the hook (hook type).
