Mitutoyo แบรนด์เครื่องมือวัดละเอียด ชั้นนำจากประเทศ ญี่ปุ่น มาตรฐานสากล ทาง JSR GROUP เป็นผู้นำเข้าและจัดจำหน่ายอย่างเป็นทางการ ไม่ว่าจะเป็นเครื่องมือวัดคุณภาพสูง เครื่องมือวัดละเอียด เครื่องมือวัดทางด้านมิติ Micrometer Digital caliper
- Sort by Price
- Display 24 Products per page
-
500-443 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-443
Range : 0-100 mm
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
329-250-30 | DEPTH MICROMETER SERIES 329 – INTERCHANGEABLE ROD TYPE, 0-150 mm | MITUTOYO
DEPTH MICROMETER SERIES 329
INTERCHANGEABLE ROD TYPE
Order No. : 329-250-30
Range : 0-150 mm
Description :
This interchangeable rod type micrometer can be used for wide range measurements.
It offers you the following benefits:- ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement
- The ratchet stop provides constant measuring force.
- Measuring rod lock.
-
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
154-101 | SMALL HOLE GAGE เกจวัดรูใน- SERIES 154 | MITUTOYO
SMALL HOLE GAGE – SERIES 154
- Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole
Order No. 154-101
-
511-701 | BORE GAGE SERIES 511, 18-35mm | MITUTOYO
BORE GAGE SERIES 511
Order No.: 511-701
Range: 18-35 mm
Description:
• This series includes models for highly accurate measurement of ø18 to 400 mm inside diameters.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion-resistant.
• The grip minimizes the variation of indicator values by reducing heat transfer from the operator’s hand.
• Optional extension rods are available for measuring deep holes. Customized products with a longer rod below the grip are also available upon request. -
573-191-30 | ABSOLUTE LOW FORCE CALIPER SERIES 573, 0-180mm | MITUTOYO
ABSOLUTE LOW FORCE CALIPER SERIES 573
Order No. 573-191-30
Range : 0-180mm
Description :
• An ABSOLUTE electromagnetic induction linear encoder system is incorporated.
• Enables accurate measurement of plastic parts and other workpieces that are difficult to measure with conventional calipers due to deformation.
• Allows fine feeding easily by using thumb roller.
• Displacement of main scale jaw is 0.3 mm.
• Measuring force: 0.5 N to 1.0 N -
515-322 | HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down
-
Disk Micrometers SERIES 369,227,169 Non Rotating Spindle Type Mitutoyo
Disk Micrometers SERIES 369,227,169 Non Rotating Spindle Type Mitutoyo
-
156-105-10 | Micrometer Stands – Series 156 | MITUTOYO
MICROMETER STANDS – SERIES 156
Description
• Dedicated stand for micrometers.
• Designed to allow benchtop use of hand micrometers or other gages which have frames suitable for gripping by the clamp.
Reduces the influence of temperature changes due to body heat, enabling higher accuracy measurement.Order No. 156-105-10
-
141-001 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-001
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
552-150-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with Long Jaws, 0-450mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with Long Jaws
Order No. : 552-150-10
Range : 0-450 mm
Description :
This is a lightweight standard model of Digimatic caliper with extra-long jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
293-100-10 | HIGH-ACCURACY DIGIMATIC MICROMETER SERIES 293 | MITUTOYO
HIGH ACCURACY DIGITAL MICROMETER 0-25mm
ABSOLUTE DIGIMATIC SERIES 293
Order No. 293-100-10
