- Sort by Popularity
- Display 36 Products per page
-
515-111 | AUXILIARY BLOCK KIT SERIES 515 – for BORE GAGE – OPTIONAL ACCESSORIES | MITUTOYO
• Used for efficient zero-setting of dial bore gages and tubular inside micrometers (18 – 150 mm) on a Height Master.
-
500-443 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-443
Range : 0-100 mm
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
329-250-30 | DEPTH MICROMETER SERIES 329 – INTERCHANGEABLE ROD TYPE, 0-150 mm | MITUTOYO
DEPTH MICROMETER SERIES 329
INTERCHANGEABLE ROD TYPE
Order No. : 329-250-30
Range : 0-150 mm
Description :
This interchangeable rod type micrometer can be used for wide range measurements.
It offers you the following benefits:- ø4mm interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement
- The ratchet stop provides constant measuring force.
- Measuring rod lock.
-
340-251-30 | Outside Micrometer with Interchangeable Anvils, 0-150 mm | MITUTOYO
340-251-30
Outside Micrometer with Interchangeable Anvils | 0-150 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
154-101 | SMALL HOLE GAGE เกจวัดรูใน- SERIES 154 | MITUTOYO
SMALL HOLE GAGE – SERIES 154
- Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole
Order No. 154-101
-
293-142-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 50-70mm | MITUTOYO
QuantuMike
Series 293 IP65 Digimatic Micrometer with 2mm/rev Spindle Feed 50-75mm• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-244-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 0-25 mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-669-20 | Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293, 75-105 mm | MITUTOYO
Quickmike -IP65 ABSOLUTE DIGIMATIC MICROMETER Series 293
Order No. 293-669-20
Range : 75-105 mm• The Quickmike provides a speedy spindle feed of 10 mm per thimble rotation which enables widely differently sized features to be measured quickly.
• Set the origin only once. The absolute linear scale maintains the origin throughout the life of battery, meaning no more zero setting (presetting) or overspeed error.
• Measuring faces: Carbide.
• Supplied with a Ratchet Stop for constant measuring force. -
102-312 | Outside Micrometer Series 102, 25-50 mm, 0.001mm | MITUTOYO
Outside Micrometer Series 102
Range : 25-50 mm
Graduation : 0.001 mm
Order No. : 102-312
• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-161 | Outside Micrometer Series 103, 600-625 mm | Mitutoyo
Outside Micrometer Series 103
Range 600-625 mm
Graduation 0.01 mm
Order No. 103-161
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
193-114 | Digit outside Micrometer Series 193, 75-100 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 75-100 mm
Order No. : 193-114
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
146-123 | Groove Micrometers -Rotating Spindle Series 146 – 25-50 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometer – Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-123
Flange : 12.7 mm
