- Sort by Default Order
- Display 12 Products per page
-
530-316 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*Clamping screw below the slider
Order No. 530-316
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-320 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*Carbide-Tipped jaws for outside measurement*
Order No. 530-320
Range : 0 – 150 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-321 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-200mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*Carbide-Tipped jaws for outside measurement*
Order No. 530-321
Range : 0 – 200 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-322 | VERNIER CALIPER – STANDARD MODEL 0-300mm| MITUTOYO
VERNIER CALIPER – STANDARD MODEL
*Carbide-Tipped jaws for outside measurement*
Order No. 530-322
Range : 0 – 300 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-335 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*Carbide-Tipped jaws for outside and inside measurement*
Order No. 530-335
Range : 0 – 150 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-501 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-600mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-501
Range : 0 – 600 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
530-502 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-1000mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
Order No. 530-502
Range : 0 – 1000 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
570-227 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – STANDARD MODEL, 0-200mm | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
STANDARD MODEL
Order No. 570-227
Range : 0-200 mm
Description :
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- Fine-adjustment gives you precise positioning.
- It comes with large and smooth-acting slider hand wheel for coarse- and fine-adjustments (570-3xx only).
- A carbide-tipped scriber is provided.
- SPC data output.
-
570-230 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – STANDARD MODEL, 0-1000mm | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
STANDARD MODEL
Order No. 570-230
Range : 0-1000 mm
Description :
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- Fine-adjustment gives you precise positioning.
- It comes with large and smooth-acting slider hand wheel for coarse- and fine-adjustments (570-3xx only).
- A carbide-tipped scriber is provided.
- SPC data output.
-
570-244 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – STANDARD MODEL, 0-8″ | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
STANDARD MODEL
Order No. 570-244
Range : 0-8″
Description
• ABS and INC measurement modes allow efficient operation.
• Rigid structure makes instrument suitable for use in severe work environments.
• The +/- measurement function widens the application range.
• Allows integration into statistical process control and measurement systems.
• Battery: SR44 (1 pc), 938882. For initial operational checks (standard accessory)
• Battery life is 5,000 hours under normal use.
• Carbide-tipped scriber (900173 for 570-227 and 244, and 905200 for 570-230 and 248) is provided as a standard accessory. (Standard accessory: scriber clamp 901338 for 570-227 and 244, and 05GZA033 for 570-230 and 248)
• When a dial indicator or test indicator is used with 570-227, the dedicated holding bar (953639, overall length 50 mm) is recommended for use. However, instrumental error may be larger because the measurement point is further from the beam.
• For precision Black Granite Surface Plates. -
570-248 | ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570 – STANDARD MODEL, 0-40″ | MITUTOYO
ABSOLUTE DIGIMATIC HEIGHT GAGE SERIES 570
STANDARD MODEL
Order No. 570-248
Range : 0-40″
Description :
This Digimatic height gauge is very precise and reliable, and offers you the following benefits:
- Its built-in ABSOLUTE linear encoder means you don‘t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur.
- Fine-adjustment gives you precise positioning.
- It comes with large and smooth-acting slider hand wheel for coarse- and fine-adjustments (570-3xx only).
- A carbide-tipped scriber is provided.
- SPC data output.
