- Sort by Default Order
- Display 12 Products per page
-
523-121 | Dial Snap Meter Series 510, 0-25 mm | MITUYOYO
Dial Snap Meter Series 510
Range : 0-25 mm
Order No. : 523-121
• Suitable for quick pass / fail inspection of mass-produced components.
• Greatly improved accuracy: indication accuracy and graduation of 1 μm.
• IP protection level: 54, coolant-splash resistant during grinding process.
• Hard-coated crystal: enhanced oil and scratch resistance. -
468-161 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT
INTERNAL MICORMETER
Order No. : 468-161
Range : 6-8 mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance. -
323-250-30 | Disk Micrometer Series 323, 0-25 mm, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-250-30
Range : 0-25mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
324-251-30 | Gear Tooth Micrometer IP65, 0-25 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 324-251-30
Range : 0-25 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• IP65 Digimatic gear tooth micrometers.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Ball anvil / spindle tips: optional. -
293-100-10 | HIGH-ACCURACY DIGIMATIC MICROMETER SERIES 293 | MITUTOYO
HIGH ACCURACY DIGITAL MICROMETER 0-25mm
ABSOLUTE DIGIMATIC SERIES 293
Order No. 293-100-10
-
368-002 | Holtest – Two Point Internal Micrometer Holtest 2.5-3 mm | MITUTOYO
2-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-002
Range. 2.5-3mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
147-301 | Hub Micrometer Series 147 – ไมโครมิเตอร์สอดวัดแกนใน | Mitutoyo
Hub Micrometer Series 147
ไมโครมิเตอร์สอดวัดแกนใน
Order No. 147-301
Range : 0-25 mm
• Measures hub thickness and shoulders inside a bore.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
510-121 | Indicating Micrometer – Series 510, 0-25 mm | MITUTOYO
Indicating Micrometer – Series 510
Order No. 510-121
Range : 0 -25 mm
• Suitable for pass / fail judgement of mass-produced components.
• Easy to use when operating one-handed due to retractable anvil.
• In the 25 mm measuring range, the model lineup offers a choice of left or right positioning of the anvil-retraction button.
• Greatly improved accuracy: indication error and graduation of 1 μm.
• IP protection level: 54, coolant-splash resistant during grinding process. -
345-250-30 | INSIDE MICROMETER SERIES 345 – CALIPER TYPE, 5-30mm | MITUTOYO
INSIDE MICROMETER SERIES 345 – CALIPER TYPE
Order No. 345-250-30
Range: 5-30 mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
141-001 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-001
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
139-001 | TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit) | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 139 – EXTENSION PIPE TYPE (main unit)
Order No. 137-019
Range : 50-63 mm
Description :
• Micrometer head for Extension-Pipe Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings, CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
339-101 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 200-225 mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-101
Range : 200-225 mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid.
