The new Type 15 insert added to our popular TR4F range
The definitive type for rough machining even with large molds
Proposed solutions
● Adopts new body shape to enhance chip removal. Suppresses chip clogging, even when cutting long overhangs.
Point > Cutting edge designed to control chip flow
●Optimizes cutting edge design to achieve smooth chip removal flow; keeps chips away from wall surfaces.
Suppresses clogging from the time chip generation starts.
Proposed solutions
●Developed a unique insert shape. Performs stable machining despite large cutting load generated during high-feed cutting with large cross-sectional and constraint areas.
●Adopts unique unequal pitch method to reduce chattering during cutting.
Point > Meets the requirements of various applications and steel types.
●The unique cross-sectional shape and cutting edge design of a single insert meets the needs of a wide range of cutting modes.
●Diverse lineup of insert grades to meet the demands posed by a wide range of work materials
***หากต้องการขอราคาสินค้า กรุณาระบุขนาดของสินค้าที่ต้องการ เพื่อความรวดเร็วในการตอบกลับ***
| Type | Order No. | No. of Flutes | DCX (mm) | LF (mm) | LH (mm) | LS (mm) | DCONMS (mm) | Shape |
|---|---|---|---|---|---|---|---|---|
| Regular | TR4F4032S32-2 | 2 | 32 | 150 | 70 | 80 | 32 | Fig.1 |
| Regular | TR4F4040S32-3 | 3 | 40 | 150 | 50 | 100 | 32 | Fig.2 |
| Long | TR4F4032L32-2 | 2 | 32 | 200 | 120 | 80 | 32 | Fig.1 |
| Long | TR4F4040L32-3 | 3 | 40 | 250 | 50 | 20 | 32 | Fig.2 |
SDNW120520TR(-P)
SDMT120520TR
| Order No. | No. of Flutes | DCX (mm) | LF (mm) | L1 (mm) | L2 (mm) | DCONMS (mm) | DHUB (mm) | TDZ (mm) | E (mm) |
|---|---|---|---|---|---|---|---|---|---|
| TR4F4032M-2 | 2 | 32 | 40 | 6 | 23 | 17 | 28.8 | M16 | 22 |
| TR4F4040M-3 | 3 | 40 | 40 | 6 | 23 | 17 | 28.8 | M16 | 22 |
SDNW120520TR(-P)
SDMT120520TR
【Note】When ※ and carbide shank are used together as a set, there is no interference.
Do not apply lubricants such as grease,etc. to the “contact faces” and “modular screws” of the “modular mill”,”dedicated shanks” and “dedicated arbor”.
| Type | Order No. | No.of flutes | DCX (mm) | DHUB (mm) | LF (mm) | CBDP (mm) | KWW (mm) | 𝘣 MM | DCONMS (mm) | DCCB (mm) | Shape | Recommended insert |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | TR4F4050B-3 | 3 | 50 | 47 | 50 | 19 | 8.4 | 5 | 22.225 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4050B-4 | 4 | 50 | 47 | 50 | 19 | 8.4 | 5 | 22.225 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4050B-5 | 5 | 50 | 47 | 50 | 19 | 8.4 | 5 | 22.225 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4063B-4 | 4 | 63 | 60 | 50 | 19 | 8.4 | 5 | 22.225 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4063B-5 | 5 | 63 | 60 | 50 | 19 | 8.4 | 5 | 22.225 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4063B-6 | 6 | 63 | 60 | 50 | 19 | 8.4 | 5 | 22.225 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4080B-5 | 5 | 80 | 76 | 70 | 32 | 12.7 | 8 | 31.75 | 26 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4080B-7 | 7 | 80 | 76 | 70 | 32 | 12.7 | 8 | 31.75 | 26 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4100B-6 | 6 | 100 | 96 | 70 | 32 | 12.7 | 8 | 31.75 | 26 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F4100B-8 | 8 | 100 | 96 | 70 | 32 | 12.7 | 8 | 31.75 | 26 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| Inch | TR4F5063B-4 | 4 | 63 | 60 | 50 | 19 | 8.4 | 5 | 22.225 | 17 | Fig.1 | SDNW150525ZTR |
| Inch | TR4F5080B-5 | 5 | 80 | 76 | 70 | 32 | 12.7 | 8 | 31.75 | 26 | Fig.1 | SDNW150525ZTR |
| Inch | TR4F5100B-6 | 6 | 100 | 96 | 70 | 32 | 12.7 | 8 | 31.75 | 26 | Fig.1 | SDNW150525ZTR |
| Inch | TR4F5125B-6 | 6 | 125 | 100 | 63 | 38 | 15.9 | 10 | 38.1 | 60 | Fig.2 | SDNW150525ZTR |
| Inch | TR4F5125B-7 | 7 | 125 | 100 | 63 | 38 | 15.9 | 10 | 38.1 | 60 | Fig.2 | SDNW150525ZTR |
| mm | TR4F4050BM-3 | 3 | 50 | 47 | 50 | 20 | 10.4 | 6.3 | 22 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4050BM-4 | 4 | 50 | 47 | 50 | 20 | 10.4 | 6.3 | 22 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4050BM-5 | 5 | 50 | 47 | 50 | 20 | 10.4 | 6.3 | 22 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4063BM-4 | 4 | 63 | 60 | 50 | 20 | 10.4 | 6.3 | 22 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4063BM-5 | 5 | 63 | 60 | 50 | 20 | 10.4 | 6.3 | 22 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4063BM-6 | 6 | 63 | 60 | 50 | 20 | 10.4 | 6.3 | 22 | 17 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4080BM-5 | 5 | 80 | 76 | 70 | 22 | 12.4 | 7 | 27 | 20 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4080BM-7 | 7 | 80 | 76 | 70 | 22 | 12.4 | 7 | 27 | 20 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4100BM-6 | 6 | 100 | 96 | 70 | 25.5 | 14.4 | 8 | 32 | 26 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F4100BM-8 | 8 | 100 | 96 | 70 | 25.5 | 14.4 | 8 | 32 | 26 | Fig.1 | SDNW120520TR(-P) SDMT120520TR |
| mm | TR4F5063BM-4 | 4 | 63 | 60 | 50 | 20 | 10.4 | 6.3 | 22 | 17 | Fig.1 | SDNW150525ZTR |
| mm | TR4F5080BM-5 | 5 | 80 | 76 | 70 | 22 | 12.4 | 7 | 27 | 20 | Fig.1 | SDNW150525ZTR |
| mm | TR4F5100BM-6 | 6 | 100 | 96 | 70 | 25.5 | 14.4 | 8 | 32 | 26 | Fig.1 | SDNW150525ZTR |
| mm | TR4F5125BM-6 | 6 | 125 | 100 | 63 | 38 | 16.4 | 9 | 40 | 60 | Fig.2 | SDNW150525ZTR |
| mm | TR4F5125BM-7 | 7 | 125 | 100 | 63 | 38 | 16.4 | 9 | 40 | 60 | Fig.2 | SDNW150525ZTR |
【Note】Arbor screw is not included.
| Item code | Tolerance class | AJ-Coating JP4105 | AJ-Coating JP4120 | AJ-Coating JM4160 | JS-Coating JS4060 | GX-Coating GX2140 | Size (mm) IC | Size (mm) S | Shape |
|---|---|---|---|---|---|---|---|---|---|
| SDNW120520TR | N | ● | ● | ● | ● | ● | 12.7 | 5.56 | Fig.1 |
| SDNW120520TR-P | N | - | ●*¹ | - | - | - | 12.7 | 5.56 | Fig.2 |
| SDNW150525ZTR | N | ● | ● | ● | ● | ● | 15.875 | 5.56 | Fig.1 |
| SDMT120520TR | M | - | ● | ● | ● | ● | 12.7 | 5.76 | Fig.3 |
| SDMT150525ZTR | M | - | ★ | ★ | ★ | ★ | 15.875 | 5.61 | Fig.4 |
*1：Can be used to process the precipitation hardening stainless steel.
【Note】Please note that the GX Coating and JS Coating do not cause a reaction in conductive touch sensors.
★：Stocked items of new products. ●：Stocked items.
62583 | 2 JAW GEAR PULLER 2 POSITION TITACROM® เหล็กดูด 2 ขา | EGAMASTER
LONG SHANK THREAD FORMING TAPS FOR STEELS
ต๊าปรีดเกลียวก้านยาว สำหรับเหล็กกล้า
Recommended Tapping Speeds depending on Materials
ความเร็วรอบจะขึ้นอยู่กับวัสดุที่ใช้ในการต๊าป
***หากต้องการขอราคาสินค้า กรุณาระบุขนาดของสินค้าที่ต้อง เพื่อความรวดเร็วในการตอบกลับ***
MHRZ | Roll Taps for Carbon Steels of Medium Hardness
Now, the worries have gone, about tapping carbon steels and alloy steels of medium hardness.
CENTRAL AREA
J.SRI RUNG RUENG IMPEX
CO.,LTD
850/1 Soi. Ladkrabang 30/5,
Ladkrabang Rd.,Kwang Ladkrabang
Khet Ladkrabang, Bangkok 10520
Thailand
Email : [email protected]
LUMPOON BRANCH
231/17 Moo. 4 T.Ban Klang A.Mueang Lumpoon, Lumpoon 51000
Thailand
Email : [email protected]
Line @ : @jsrgroup
EASTERN AREA
C.DUREON MACHINE AND
TOOLS CO.,LTD
888 Moo 4 Bypass-Chonburi Rd, T.Nongmaidaeng,A.Muang Chonburi,Chonburi 20000
Thailand
Tel : 038-215-726-8,038-743-414-21, 061-401-2144-8
Email : [email protected]
NAKHONRATCHASIMA BRANCH
1444/50-51 M.13 T.Joho A.Muang Nakhonratchasima,
Nakhonratchasima 30310 Thailand
Email : [email protected]
516-596 | Rectangular Gauge Block Sets (122 Block) – Series 516 | Mit...