เครื่องมืออุตสาหกรรม – Spiral fluted taps for blind hole – for Steel
- Sort by Popularity
- Display 12 Products per page
-
LO-SP | LOW SPIRAL FLUTED TAPS – ต๊าปร่องเลื้อย องศาเกลียวต่ำ | YAMAWA
LO-SP
LOW SPIRAL FLUTED TAPS
ต๊าปร่องเลื้อย องสาเกลียวต่ำ
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Spiral flutes with low helix can break down chips and can eject them smoothly. Suitable for thermal refined high carbon steels and alloy tool steels. Effective in horizontal tapping.
■ ต๊าปร่องเลื้อยองศาเกลียวต่ำสามารถกำจัดเศษได้ดี เหมาะสำหรับเหล็กกล้าคาร์บอนสูง และเหล็กกล้าเครื่องมือ มีความสามารถในการต๊าบแนวนอน** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
PM-SP | SPIRAL FLUTED TAPS FOR HARD-TO-MACHINE MATERIALS | YAMAWA
PM-SP | Spiral Fluted Taps for Hard-to-Machine Materials
■ Spiral fluted tap suitable for tapping hard steels with hardness beteen 35-45HRC such as forgings and thermal refined steels of high carbon steels ans alloy steels, and mold steels.
■ ต๊าบร่องเลื้อย สำหรับเหล็กที่มีความแข็ง 35-45HRC เช่นเหล็กฟอจจิ้ง เหล็กกล้าคาร์บอนสูงชุบแข็ง, เหล็กกล้าผสม และเหล็กกล้าแม่พิมพ์
-
XSP | X SERIES SPIRAL FLUTED TAPS – ต๊าปร่องเลื้อยตระกูลเอ็กซ์ | YAMAWA
XSP
X SERIES SPIRAL FLUTED TAPS
ต๊าปร่องเลื้อยตระกูลบวก
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าบ
■ Applying the blanks of high toughness and high accuracy, XSP derives the maximum performance from high facility machining centers and high precision toolings. Spiral fluted tap.
■ XSP จะทำงานได้ประสิทธิภาพสูงสุดกับเครื่องจักรที่มีความแม่นยำสูง, ด้วยการใช้วัสดุทำต๊าบ (blank tap) ที่มีความแข็งแรงทนทาน และเที่ยงตรงสูง** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
LS-LO-SP | LONG SHANK LOW SPIRAL FLUTED TAPS – ต๊าปร่องเลื้อยก้านยาว องศาเกลียวต่ำ | YAMAWA
LS-LO-SP
LONG SHANK LOW SPIRAL FLUTED TAPS
ต๊าปร่องเลื้อยก้านยาว องสาเกลียวต่ำ
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Spiral flutes with low helix can break down chips and can eject them smoothly. LS-LO-SP is the long shank spiral fluted tap suitable for thermal refined high carbon steels and alloy tool steels. Effective in horizontal tapping.
■ ต๊าปร่องเลื้อยองศาเกลียวต่ำสามารถกำจัดเศษได้ดี. LS-LO-SP เป็นต๊าบร่องเลื้อยก้านยาว เหมาะสำหรับเหล็กกล้าคาร์บอนสูง และเหล็กกล้าเครื่องมือ มีความสามารถในการต๊าปแนวนอน** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
MC-SP | SPIRAL FLUTED TAPS with Internal coolant hole – ต๊าปร่องเลื้อย มีรูน้ำมันหล่อเย็น | YAMAWA
MC-SP
SPIRAL FLUTED TAPS WITH INTERNAL COOLANT HOLE
ต๊าปร่องเลื้อย มีรูน้ำมันหล่อเย็น
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Through internal coolant hole (center through type), satisfactory amount of oil is supplied to the exact cutting area. MC-SP spiral fluted tap ensures a long tool life as well as cuts high precision threads with good surface finish.
■ เป็นต๊าปที่มีรูน้ำมัน เพื่อใช้ในการหล่อเย็นต๊าบ MC-SP มีอายุการใช้งานที่ยาวนาน และมีการตัดเกลียวที่แม่นยำสูง และได้ผิวเกลียวที่ดี** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
AU+SP | PLUS SERIES SPIRAL FLUTED TAPS, Optimum Coating for the tapping – ต๊าปร่องเลื้อยตระกูลบวก, เคลือบผิว | YAMAWA
AU+SP
PLUS SERIES SPIRAL FLUTED TAPS, Optimum Coating for the tapping
ต๊าปร่องเลื้อยตระกูลบวก, เคลือบผิว
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
• AU+SP has a special thread portion design with thread crests ground off and a few full threads after chamfer left unchanged.
• Effects of AU+SP are as follows:
– Prevention of chipping trouble at full thread portion
– Reduction of tapping torque and tapping friction
– Good chip ejection• AU+SP มีเหลียวที่ถูกออกแบบมาพิเศษ โดยปรับปรุงที่ร่องคายเศษ และเพิ่มเกลียวเต็มให้ส่วนเกลียวหลังแชมเฟอร์
• ผลของ AU+SP มีดังต่อไปนี้
– ป้องกันการแตกหักของเกลียวเต็ม
– ลดแรงบิด และแรงเสียดทานในการต๊าป
– การคายเศษมีประสิทธิภาพ** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
LS-PM-SP | LONG SHANK SPIRAL FLUTED TAPS for Hard-to-Machine Materials – ต๊าปร่องเลื้อยก้านยาว สำหรับวัสดุที่ต๊าปยาก | YAMAWA
LS-PM-SP
LONG SHANK SPIRAL FLUTED TAPS FOR HARD-TO-MACHINE MATERIALS
ต๊าปร่องเลื้อยก้านยาว สำหรับวัสดุที่ต๊าปยาก
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Long shank spiral fluted tap suitable for tapping hard steels with hardness between 35-45HRC such as forgings and thermal refined steels of high carbon steels and alloy steels, and mold steels.
■ ต๊าบร่องเลื้อยก้านยาว สำหรับเหล็กที่มีความแข็ง 35-45HRC เช่นเหล็กฟอจจิ้ง เหล็กกล้าคาร์บอนสูงชุบแข็ง, เหล็กกล้าผสม และเหล็กกล้าแม่พิมพ์** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
AUXSP | X SERIES SPIRAL FLUTED TAPS, COATED – ต๊าปร่องเลื้อยตระกูลเอ็กซ์, เคลือบผิว | YAMAWA
AUXSP
X SERIES SPIRAL FLUTED TAPS, Coated
ต๊าปร่องเลื้อยตระกูลเอ็กซ์, เคลือบผิว
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
Use with dedicated toolings is recommended.
เลือกใช้เครื่องมือให้ตรงกับข้อแนะนำ■ Applying the blanks of high toughness and high accuracy, AUXSP derives the maximum performance from high facility machining centers and high precision toolings. Special thread portion design with thread crests ground off and a few full threads left unchanged. Combination of this design and the special flute geometry maintains good chip ejection and reduces friction. The Spiral Fluted Tap is adopting the optimum coating for the tapping condition.
■ ในการใช้วัสดุทำต๊าบที่มีความแข็งแรง และเที่ยงตรงสูง ส่งผลให้ AUXSP เป็นต๊าปที่มีประสิทธิภาพสูง รวมกับการออกแบบร่องคายเศษ ส่วนของเกลียว และลักษณะของฟัน ต๊าปแบบพิเศษ ทำให้ได้การต๊าปที่มีประสิทธิภาพสูง สามารถขับเศษได้ดี และลดแรงเสียดทานในการต๊าป** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**