เครื่องมืออุตสาหกรรม – เครื่องมืออุตสาหกรรม – for Steel สำหรับชิ้นงานวัสดุเหล็ก โดย YAMAWA
- Sort by Name
- Display -2 Products per page
-
AU+SP | PLUS SERIES SPIRAL FLUTED TAPS, Optimum Coating for the tapping – ต๊าปร่องเลื้อยตระกูลบวก, เคลือบผิว | YAMAWA
AU+SP
PLUS SERIES SPIRAL FLUTED TAPS, Optimum Coating for the tapping
ต๊าปร่องเลื้อยตระกูลบวก, เคลือบผิว
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
• AU+SP has a special thread portion design with thread crests ground off and a few full threads after chamfer left unchanged.
• Effects of AU+SP are as follows:
– Prevention of chipping trouble at full thread portion
– Reduction of tapping torque and tapping friction
– Good chip ejection• AU+SP มีเหลียวที่ถูกออกแบบมาพิเศษ โดยปรับปรุงที่ร่องคายเศษ และเพิ่มเกลียวเต็มให้ส่วนเกลียวหลังแชมเฟอร์
• ผลของ AU+SP มีดังต่อไปนี้
– ป้องกันการแตกหักของเกลียวเต็ม
– ลดแรงบิด และแรงเสียดทานในการต๊าป
– การคายเศษมีประสิทธิภาพ** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
AUXSP | X SERIES SPIRAL FLUTED TAPS, COATED – ต๊าปร่องเลื้อยตระกูลเอ็กซ์, เคลือบผิว | YAMAWA
AUXSP
X SERIES SPIRAL FLUTED TAPS, Coated
ต๊าปร่องเลื้อยตระกูลเอ็กซ์, เคลือบผิว
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
Use with dedicated toolings is recommended.
เลือกใช้เครื่องมือให้ตรงกับข้อแนะนำ■ Applying the blanks of high toughness and high accuracy, AUXSP derives the maximum performance from high facility machining centers and high precision toolings. Special thread portion design with thread crests ground off and a few full threads left unchanged. Combination of this design and the special flute geometry maintains good chip ejection and reduces friction. The Spiral Fluted Tap is adopting the optimum coating for the tapping condition.
■ ในการใช้วัสดุทำต๊าบที่มีความแข็งแรง และเที่ยงตรงสูง ส่งผลให้ AUXSP เป็นต๊าปที่มีประสิทธิภาพสูง รวมกับการออกแบบร่องคายเศษ ส่วนของเกลียว และลักษณะของฟัน ต๊าปแบบพิเศษ ทำให้ได้การต๊าปที่มีประสิทธิภาพสูง สามารถขับเศษได้ดี และลดแรงเสียดทานในการต๊าป** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
E-SP | SPIRAL FLUTED TAPS FOR SOFT STRUCTURAL STEELS – ต๊าปร่องเลื้อยสำหรับเหล็กนิ่ม | YAMAWA
E-SP
SPIRAL FLUTED TAPS FOR SOFT STRUCTURAL STEELS
ต๊าปร่องเลื้อยสำหรับเหล็กนิ่ม
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Suitable particularly for soft steels such as SS41, S25C and the like
■ เหมาะสมกับเหล็กที่มีโครงสร้างนิ่ม เช่น SS41, S25C** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
F-SP | SPIRAL FLUTED TAPS for High Speed Tapping – ต๊าปร่องเลื้อยสำหรับงานที่ใช้ความเร็วสูงเหมาะกับการใช้บนเครื่องจักร CNC (Syncronized Feeding) | YAMAWA
F-SP
SPIRAL FLUTED TAPS FOR HIGH SPEED TAPPING
ต๊าปร่องเลื้อยสำหรับงานที่ใช้ความเร็วสูงเหมาะกับการใช้บนเครื่องจักร CNC (Syncronized Feeding)Specification
Tapping Speeds depending on Materials
Product Features
● High speed machining is possible with a machine equipped with a fully synchronous feed mechanism.
● The F-SP exhibits excellent chip ejection properties from its unique flute shape and short thread length.
● At low speed, the shape and ejection of the chips can deteriorate, causing problems.***หากต้องการขอราคาสินค้า กรุณาระบุขนาดของสินค้าที่ต้องการ เพื่อความรวดเร็วในการตอบกลับ***
-
HC-SP OX | SPIRAL FLUTED TAPS FOR HIGHT CARBON STEELS, OXIDIZED-ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอนสูง | YAMAWA
HC-SP OX
SPIRAL FLUTED TAPS FOR HIGHT CARBON STEELS, OXIDIZED
ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอนสูง
Recommended Tapping Speeds depending on Materials / ความเร็วรอบจะขึ้นอยู่กับวัสดุที่ใช้ในการต๊าบ
■ Spiral fluted tap suitable for high carbon steels such as S55C and the like, Oxidized to avoid welding trouble.
■ ต๊าบร่องเลื้อยที่เหมาะสมกับเหล็กคาร์บอนสูง เช่น S55C, ผสมออกไซด์** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
HC-SP OX LH | SPIRAL FLUTED TAPS FOR HIGHT CARBON STEELS, OXIDED-ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอนสูง เกลียวซ้าย | YAMAWA
HC-SP OX LH
SPIRAL FLUTED TAPS FOR HIGHT CARBON STEELS, OXIDED
ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอนสูง เกลียวซ้าย
Recommended Tapping Speeds depending on Materials / ความเร็วรอบจะข้นึ อยู่กับวัสดุท่ใี ช้ในการต๊าบ
■ Spiral fluted tap suitable for high carbon steels such as S55C and the like, oxided to avoid welding trouble.
■ ต๊าบร่องเลื้อยที่เหมาะสมกับเหล็กคาร์บอนสูง เช่น S55C, ผสมออกไซด์** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
HC+SP OX | SPIRAL FLUTED TAPS FOR HIGHT CARBON STEELS, OXIDED-ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอนสูง | YAMAWA
HC+SP OX
SPIRAL FLUTED TAPS FOR HIGHT CARBON STEELS, OXIDED
ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอนสูง
Recommended Tapping Speeds depending on Materials / ความเร็วรอบจะข้นึ อยู่กับวัสดุท่ใี ช้ในการต๊าบ
■ Spiral fluted tap suitable for high carbon steels such as S55C and the like, oxided to avoid welding trouble.
■ ต๊าบร่องเลื้อยที่เหมาะสมกับเหล็กคาร์บอนสูง เช่น S55C, ผสมออกไซด์** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
HDISP | FOR DRY TAPPING, BLIND HOLE USE. SPIRAL FLUTED TAPS FOR STEELS | YAMAWA
HFIHS
FOR DRY TAPPING, BLIND HOLE USE. SPIRAL FLUTED TAPS FOR STEELS
ต๊าปร่องเลื้อยสำหรับเหล็กกล้า, สำหรับการต๊าปแบบแห้ง รูตัน
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Applicable for the tapping under mist or dry condition. Having internal coolant hole(center through type), HDISP is suitable for carbon steels and alloy steels, blind hole use. For both horizontal and vertical tapping use.
■ ใช้สำหรับการต๊าปแห้ง ต๊าบมีรูน้ำมัน เหมาะสำหรับเหล็กกล้าคาร์บอน หรือโลหะผสม เป็นงานรูตัน ใช้งานต๊าปได้ทั้งแบบแนวนอนและแนวตั้ง** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
HFIHS | FOR ULTRA FAST TAPPING, VERTICAL USE. SPIRAL FLUTED TAPS FOR CARBON STEELS | YAMAWA
HFIHS
FOR ULTRA FAST TAPPING, VERTICAL USE. SPIRAL FLUTED TAPS FOR CARBON STEELS
ต๊าปร่องเลื้อยสำหรับเหล็กกล้าคาร์บอน, สำหรับการต๊าปความเร็วสูง, สำหรับแนวตั้ง
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Applicable for ultra high speed tapping. Having internal coolant hole(center through type), HFIHS is suitable for carbon steels and alloy steels, blind hole use. Vertical tapping use.
■ ใช้สำหรับการต๊าปที่ใช้รอบความเร็วสูงเป็นพิเศษ ต๊าปมีรูน้ำมัน เหมาะสำหรับเหล็กกล้าคาร์บอน หรือโลหะผสม ใช้งานต๊าปแบบแนวตั้ง** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
HFISP | FOR ULTRA FAST TAPPING, HORIZANTAL USE. LOW SPIRAL FLUTED TAPS FOR CARBON STEELS | YAMAWA
HFIHS
FOR ULTRA FAST TAPPING, HORIZANTAL USE. LOW SPIRAL FLUTED TAPS FOR CARBON STEELS
ต๊าปร่องเลื้อยเกลียวต่ำสำหรับเหล็กกล้าคาร์บอน, สำหรับการต๊าปความเร็วสูง, สำหรับแนวนอน
Recommended Tapping Speeds depending on Materialsความเร็วรอบจะขึ้น อยู่กับวัสดุที่ใช้ในการต๊าป
■ Applicable for ultra high speed tapping. Having internal coolant hole(center through hole), HFISP is suitable for carbon steels and alloy steels, blind hole use. Effective in horizontal tapping use.
■ ใช้สำหรับการต๊าปที่ใช้รอบความเร็วสูงเป็นพิเศษ ต๊าปมีรูน้ำมัน เหมาะสำหรับเหล็กกล้าคาร์บอน หรือโลหะผสม ใช้งานต๊าปแบบแนวนอน** กรุณาระบุขนาดที่ต้องการในการขอราคาสินค้า**
-
HVPO | HYBRID VALUE SPIRAL POINTED TAPS FOR STEELS PARTS IN THE HEAVY METALWORKING INDUSTRY | YAMAWA
HVPO | HYBRID VALUE SPIRAL POINTED TAPS FOR STEELS PARTS IN THE HEAVY METALWORKING INDUSTRY | YAMAWA
HVPO
HYBRID VALUE SPIRAL POINTED TAPS FOR STEELS PARTS IN THE HEAVY METALWORKING INDUSTRY
Product Features
● The unique flute shapes achieve excellent internal threads and longer tool life by improving chip evacation snd cutting resistace!
● The longer overall length increases the clearance between the holder and workpiece, ensuring sufficient supply of cutting oil.Tapping data
• Improvement of chipped flutes
Tapping conditions [M10 × 1.5]
Work Piece Material SS400
Tapping Speed 10 m/min
Tapping Length 25 mm
Machine Type Vertical MC Tapping Fluid Water soluble cutting fluid Workpiece material and tapping speed
Workpiece material Guideline for tapping speed (m/min) M3〜M5 M6〜M16 Low Carbon Steels 〜S20C/SS400 3〜9 3〜12 Medium Carbon Steels S25C〜S45C 3〜9 3〜12 High Carbon Steels S45C〜 3〜9 3〜12 Alloy Steels SCM/SCr 3〜9 3〜12 Thermal Refined Steels 25〜35HRC 3〜9 3〜12 Cast Steels SC 3〜9 3〜12 Stainless Steels SUS303/SUS304 〜5 〜5