- Sort by Popularity
- Display 12 Products per page
-
143-110 | Caliper Type Micrometers Series 143, 225-250 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-110
Range : 225-250 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-128 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 75-100 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-128
Range : 75-100 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
123-111 | Disk Micrometer – Hardened Steel Disk Series 123, 250-275 mm, Disk=30 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-111
Range : 250-275 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
227-223-20 | Absolute Disk Micrometer, Adjustable measuring force (LCD)- QuickMike, IP65 – 0-10 mm | MITUTOYO
ABSOLUTE Disk Micrometer, Adjustable measuring force (LCD) – IP65, QuickMike
Order No. : 227-223-20
Range : 0-10 mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force. -
395-254-30 | Tube Micrometer, 75-100mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-254-30
Range : 75-100mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
115-303 | Tube Micrometer – Spherical and Cylindrical Anvil Type, 25-50mm | MITUTOYO
TUBE MICROMETER – SPHERICAL AND CYLINDRICAL ANVIL TYPE – SERIES 115
Range : 25-50 mm
Order No. 115-303
• Spindle face: Carbide.
• Series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
111-122 | Spline Micrometer, 175-200 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-122
Range. : 175-200 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
112-168 | Point Micrometer with Carbide Tip – Series 112, 75-100 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-168
Range : 75-100 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
154-102 | SMALL HOLE GAGE เกจวัดรูใน- SERIES 154 | MITUTOYO
SMALL HOLE GAGE – SERIES 154
- Designed to be locked in position (with knurled lockscrew) and the diameter measured across the two lobes with a micrometer after withdrawal from the hole
Order No. 154-102
-
167-122 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-122
Length : 550 mm
-
167-378 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-378
Length : 1350 mm
-
167-267 | Setting Standard for Screw Thread Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167
Used for accurately setting screw thread micrometers at the start or end of the measuring range.
Metric (unified) θ = 60°
Order No. 167-267
