- Sort by Popularity
- Display 12 Products per page
-
103-164 | Outside Micrometer Series 103, 675-700 mm | Mitutoyo
Outside Micrometer Series 103
Range 675-700 mm
Graduation 0.01 mm
Order No. 103-164
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-201 | Indicator Type Micrometer Series 107, 0-25 mm, without indicator | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 0-25 mm
Order No. : 107-201
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-125 | Groove Micrometers -Rotating Spindle Series 146 – 75-100 mm, 12.7 mm Flange | MITUTOYO
Groove Micrometers -Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-125
Flange : 12.7 mm
-
422-261-30 | Blade Micrometer – Non-Rotating Spindle Type Series 422 | MITUTOYO
Blade Micrometer – Non-Rotating Spindle Type Series 422
ไมโครมิเตอร์ปากมีด
Order No. : 422-261-30
Range : 25-50 mm
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-252-30 | Outside Micrometer with Interchangeable Anvils, 150-300 mm | MITUTOYO
340-252-30
Outside Micrometer with Interchangeable Anvils | 150-300 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constantmeasuring force. -
105-419 | Outside Micrometer with Anvil Extension Collars 1200-1400 mm | MITUTOYO
Order No. 105-419
Outside Micrometer with Anvil Extension Collars
Range : 1200-1400 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-112 | Caliper Type Micrometers Series 143, 275-300 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-112
Range : 275-300 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-130 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 125-150 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-130
Range : 125-150 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
123-113 | Disk Micrometer – Disks with Carbide Tips Series 123, 0-25 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-113
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-351-30 | Disk Micrometer – Non-Rotating Spindle, IP65 Inch/Metric, 1-2″ | MITUTOYO
Disk Micrometer – Non-Rotating Spindle – IP65
Order No. : 369-351-30
Range : 1-2″
Disk : 20mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force. -
395-352-30 | Tube Micrometer, Inch/Metric, 1-2″ | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-352-30
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force.Range : 1-2″
-
115-316 | Tube Micrometer – Spherical and Cylindrical Anvil Type, 0-25mm | MITUTOYO
TUBE MICROMETER – SPHERICAL AND CYLINDRICAL ANVIL TYPE – SERIES 115
Range : 0-25 mm
Order No. 115-316
• Spindle face: Carbide.
• Series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force.
