- Sort by Default Order
- Display 12 Products per page
-
TD4N type | RADIUS MILL | MOLDINO
Radius Mill TD4N type
Lineup expanded with insert for high-hardness materials
Technology
Features 1 Reduces uncut remnants on work pieces
The cutting edge shape was reviewed for TD4N so that uncut remnants are reduced.
This enables the load on the next process to be reduced by up to 40%compared to
conventional products.● Since it is difficult to create tool shape definitions in CAM for the complicated cutting edge shapes of high-feed tools, in many cases the tools are used with the definition for a simple R radius tool. The differences between this definition and the actual tool shape result in uncut remnants that cannot be checked on CAM and become more work for the next process.
Features 2 Economical 4-corner inserts with chip breakers for various applications
●By making it possible to use both the front and back sides of inserts, 4 corners can be used. The inserts are provided with a large rake angle which exhibits an excellent cutting force reduction effect even when compared to general positive-shape inserts.
⦿Features of insert breaker
C breaker
Corresponds to our general high-feed-type inserts (EDNW, EPNW,
WDNW, SDNW), and is resistant to chip jamming, vibrations, and crater wear.B breaker
Enables reduced cutting force when cutting work materials such as
stainless steels, etc. that require free-cutting performance.⦿Features of insert for high-hardness materials
High-precision G-class insert suppresses dispersion in tool life.
Employs JP4105, a grade for high-hardness materials which provides long
service life for machining 50HRC or harder matrials.Features 3 Large tip diameter for excellent handling
●Compared to conventional high-feed tools, TD4N has a
large tip diameter, which suppresses the generation of
uncut remnants which easily occur on the bottom surface
of machined areas. In addition, since the cutting width
(ae) can be set to a large value, this is also effective for
improving machining efficiency.Features 4 Excellent chip discharge characteristics
●Reduces the occurrence of sudden problems due to jamming of cutting chips. In addition, good chip removal makes it possible to further improve cutting performance.
***หากต้องการขอราคาสินค้า กรุณาระบุขนาดของสินค้าที่ต้องการ เพื่อความรวดเร็วในการตอบกลับ***
-
HPsRZ | High Performance Roll Taps for Miniature Threads | YAMAWA
HPsRZ
High Performance Roll Taps for Miniature Threads
- Improved tool rigidity from new blank shape that offers torsional strength and shank accuracy.
- Markings that were on the shanks outside diameter have been transferred to the square part to improve circularity.
- New thread portion offers improvements in the accuracy of the “GS” class of internal thread tapping.
***หากต้องการขอราคาสินค้า กรุณาระบุขนาดของสินค้าที่ต้อง เพื่อความรวดเร็วในการตอบกลับ***
-
SURZ | SU ROLL TAPS | YAMAWA
SURZ | SU Roll Taps
- Adopting the special form on tap’s root, SURZ controls the minor diameter geometry of internal threads.
- Special lobe shape realizes low tapping torque.
- High efficiency can be obtained in thread forming of stainless steel parts.
- By adjusting bored hole size, you can adjust the minor diameter geometry of internal threads.
-
HP+RZ/HP-RZ | HIGH PERFORMANCE ROLL TAPS, COATED | YAMAWA
HP+RZ/HP-RZ | High Performance Roll Taps, Coated
- The HP+RZ/HP-RZ roll taps are suitable for processing steel materials with a hardness of 35 HRC or less and light alloys. These roll taps are recommended for high speed machining 20 to 50 m / min.
- Roll form processing of stainless steel and thermal refined materials up to 40 HRC are now possible.
- The roll form tapping torque has been reduced by 20% or more, making it possible to significantly improve tool life compared with conventional roll form tap products.
- The HP+RZ/HP-RZ taps make it possible to use a water soluble cutting fluid.
-
OL+RZ/OL-RZ | ROLL TAPS FOR DRY TAPPING, COATED | YAMAWA
OL+RZ/OL-RZ | Roll Taps for Dry Tapping, Coated
- The OL+RZ/OL-RZ roll taps have made it possible tapping without lubrication in the sizes M6 and smaller. These taps are designed for thin steel sheet screw threads or steel with a relatively short screw thread length.
- Increased shank accuracy and an optimum lobe portion design produces a smooth thread forming action and the internal threadaccuracy is stabilized even under severe conditions.
- For blind hole tapping, please select the HP + RZ / HP-RZ tap series as an alternative item.
-
IHT | HAND TAP FOR GENERAL PURPOSE – ต๊าปมือตระกูลไอ สำหรับงานทั่วไป | YAMAWA
IHT
HAND TAP FOR GENERAL PURPOSE
ต๊าปมือตระกูลไอ สำหรับงานทั่วไป
Recommended Tapping Speeds depending on Materials
ความเร็วรอบจะขึ้นอยู่กับวัสดุที่ใช้ในการต๊าป
• IHT is for hand tapping and for re-threading, and is used for both through hole and blind hole
• Use for threading of the iron (SPC or SS400) products used in our daily life.
• Surface treated. Oxidization, the most suitable surface treatment for iron products.
• Suitable for internal thread cutting in small quantity, such as tapping of test pieces.
• The 5 thread chamfer is recommended for through holes and 2 thread chamfer is recommeded for blind holes.
• IHT คือต๊าบมือ ใช้เพื่อล้างเกลียว หรือสามารถใช้ได้ทั้งต๊าบรูทะลุ และรูตัน• ใช้งานกับวัสดุที่เป็นเหล็ก (SPC หรือ SS400) ผลิตงานที่ใช้ในชีวิตประจำวัน
• ทำผิวด้วยวิธีออกไซด์ซึ่งเหมาะสมกับวัสดุเหล็ก
• เหมาะสมกับการต๊าบในจำนวนที่น้อย เช่น การทดสอบการต๊าบ
• สำหรับรูทะลุแนะนำเป็น5ฟัน ส่วนรูตันแนะนำเป็น2ฟัน***หากต้องการขอราคาสินค้า กรุณาระบุขนาดของสินค้าที่ต้อง เพื่อความรวดเร็วในการตอบกลับ***