- Sort by Popularity
- Display 12 Products per page
-
339-101 | TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE, 200-225 mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 339 – EXTENSION PIPE TYPE
Order No.: 339-101
Range : 200-225 mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer.
• IP65 (water-proof) protection level that enables use in the presence of cutting fluid. -
133-172 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 775-800 mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-172
Range : 775-800mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
139-175 | TUBULAR INSIDE MICROMETER SERIES 139 – EXTENSION PIPE TYPE, 100-1300mm | MITUTOYO
TUBULAR INSIDE MICROMETER SERIES 139 – EXTENSION PIPE TYPE
Order No.: 139-175
Range : 100-1300mm
Description :
• Wide range of inside measurements possible by combining Extension Pipes and anvils with the micrometer head.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
133-152 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 275-300mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-152
Range : 275-300mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
337-101 | TUBULAR INSIDE MICROMETERS SERIES 337 – EXTENSION ROD TYPE, 200-225 mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 337 – EXTENSION ROD TYPE
Order No. : 337-101
Range : 200-225 mm
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
145-186 | INSIDE MICROMETER SERIES 145 – CALIPER TYPE, 25-50mm | MITUTOYO
INSIDE MICROMETER SERIES 145 – CALIPER TYPE
Order No. 145-186
Range: 25-50mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
133-162 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 525-550mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-162
Range : 525-550mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
137-206 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE, 50-150mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE
Order No.: 137-206
Range : 50-150mm
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
141-101 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE , 25-50mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-101
Range: 25-50mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
141-118 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE , 200-1000mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-118
Range: 200-1000mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
137-013 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit) | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE (main unit)
CARBIDE-TIPPED
Order No. 137-013
Range : 50-63 mm
Description :
• Micrometer head for Extension-Rod Type inside micrometer.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
133-173 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 800-825 mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-173
Range : 800-825mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment.
