Digimatic Holtest

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 3-3.5″

Order No. : 568-472

Description :

This is a individual unit Three-Point Digimatic Snap Open Bore Gauge.
It offers you the following benefits:

• It enables you to take measurements easily and quickly.
• Titanium-coated measuring pins gives you excellent durability and impact resistance.
• 330° rotatable display unit also gives you easy reading at any angle.
• GO/NG tolerance judgement function.

ABSOLUTE BOREMATIC SERIES 568

INTERCHANGEABLE-HEAD BORE GAGE STES

Order No. : 568-936

Description :

• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER

Order No. : 468-164

Range : 12-16 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-275

Range : 5-6″

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 20-25mm

Order No. : 568-366

Description :

• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

INSIDE MICROMETER SERIES 145 – CALIPER TYPE

Order No. 145-187

Range: 50-75mm

Description:

• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-175

Range : 125-150 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO

Interchange-Head Set

Order No. : 468-975

Range :100-200 mm

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 0.35-0.425″

Order No. : 568-462

Description :

• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional).

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO

Order No. : 468-265

Range : 0.65-0.8″

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO

Non-Interchange-Head Set

Order No. : 468-986

Range : 0.275″ – 0.5″

Description : 

• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points.

ABSOLUTE BOREMATIC SERIES 568

ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES

Range : 3.5-4″

Order No. : 568-473

Description :

This is a individual unit Three-Point Digimatic Snap Open Bore Gauge.
It offers you the following benefits:

• It enables you to take measurements easily and quickly.
• Titanium-coated measuring pins gives you excellent durability and impact resistance.
• 330° rotatable display unit also gives you easy reading at any angle.
• GO/NG tolerance judgement function.