- Sort by Popularity
- Display 12 Products per page
-
468-261 | Digimatic Holtest – 3-point Internal Micrometers – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER | MITUTOYO
Order No. : 468-261
Range : 0.275-0.35″
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
468-982 | Digimatic Holtest – 3-point Internal Micrometers Set (Non-Interchange-Head Set) – Series 468 | MITUTOYO
DIGIMATIC HOLTEST – 3-POINT INTERNAL MICORMETER SET | MITUTOYO
Non-Interchange-Head Set
Order No. : 468-982
Range : 12-25mm
Description :
• Three-point internal micrometer with large LCD readout. (Character height 7.4 mm)
• Deep holes can be measured by attaching an Extension Rod (optional).
• Measurements can be made close to the bottom of a blind hole.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Two preset values can be stored as reference points. -
368-180 | Holtest – Three-Point Internal Micrometer Holtest 250-275mm | MITUTOYO
3-POINT INTERNAL MICROMETER HOLTEST | MITUTOYO
Order No. 368-180
Range. 250-275mm
Description
• Titanium-coated measuring pins on the three-point type (over 6 mm range models) provide excellent durability and impact resistance.
• Three-point internal micrometer with measuring range 6 mm or longer allows stable measurement through self-centering.
• Measurement can be made close to the bottom of a blind hole.
• Deep holes can be measured by attaching an Extension Rod (optional) which is available on models over 6 mm (0.275 in) measuring range. -
568-363 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 10-12mm | MITUTOYO
568-363 | ABSOLUTE BOREMATIC SERIES 568 – ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES 10-12mm | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
ABSOLUTE DIGIMATIC SNAP-OPEN BORE GAGES
Range : 10-12mm
Order No. : 568-363
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
568-928 | ABSOLUTE BOREMATIC SERIES 568 – INTERCHANGEABLE-HEAD BORE GAGE STES | MITUTOYO
ABSOLUTE BOREMATIC SERIES 568
INTERCHANGEABLE-HEAD BORE GAGE STES
Order No. : 568-928
Description :
• The Borematic allows quick and easy measurement with lever operation.
• Titanium-coated measuring pins provide excellent durability and impact resistance.
• Three-Point contact measuring head enables stable measurement.
• Deep holes can be measured by attaching an Extension Rod (optional). -
133-161 | TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE, 500-525mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 133 – SINGLE ROD TYPE
Order No. : 133-161
Range : 500-525mm
Description :
• Standard Single-Rod Type inside micrometer.
• Carbide measuring faces.
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker and Gauge Block Accessory Sets are available as reference gages datum adjustment. -
137-205 | TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE, 50-1500mm | MITUTOYO
TUBULAR INSIDE MICROMETERS SERIES 137 – EXTENSION ROD TYPE
Order No.: 137-205
Range : 50-1500mm
Description :
• Wide range of inside measurements possible by combining Extension Rods and anvils with the micrometer head.
• Two types of measuring faces are available; with or without carbide tip. (The 337 Series is only available with carbide tip)
• The sleeve is rotated to adjust the reference point adjustment when setting to a length standard.
• An inside length standard is required for accurately setting the micrometer. -
141-003 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED, 25-32mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE CARBIDE TIPPED
Order No. 141-003
Range: 25-32mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
526-101 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 7-10mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
Order No.: 526-101
Range: 7 -10 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø7 to 18 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
511-771-20 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 18-35mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-771-20
Range: 18-35 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
511-427-20 | BORE GAGES SERRIES 511 – for BLIND HOLES, 50-150mm | MITUTOYO
BORE GAGE SERIES 511 FOR BLIND HOLES
Order No.: 511-427-20
Range: 50-150mm
Description :
• Capable of ID (inside diameter) measurement close to the bottom of a hole.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• Optional Extension Rods can be attached for measuring deep holes. -
177-255 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-255
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.)
