Digimatic Calipers

NECK CALIPER SERIES 573 

ABSOLUTE DIGIMATIC AND VERNIER TYPE  (Point jaw type)

Order No.: 573-652-20

Range : 0-150 mm

Description :

• Can measure wall thickness inside bores and recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable.

NECK CALIPER SERIES 573 

ABSOLUTE DIGIMATIC AND VERNIER TYPE  (Without thumb roller)

Order No.: 573-653-20

Range : 0-150 mm

Description :

• Can measure wall thickness inside bores and recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable.

NECK CALIPER SERIES 573 

ABSOLUTE DIGIMATIC AND VERNIER TYPE 

Order No.: 573-654-20

Range : 0-150 mm

Description :

• Can measure wall thickness inside bores and recesses.
• Digimatic models are an IP67 Absolute type. Slider action is smooth, firm and comfortable.

TUBE THICKNESS CALIPER SERIES 573 

ABSOLUTE DIGIMATIC AND VERNIER TYPE

Order No. 573-662-20

Range : 0-150mm

Description :

• The beam-mounted jaw is a round bar that facilitates measurements of tube wall thickness.
• Digimatic models are IP67 Absolute type. Slider action is smooth, firm and comfortable.
• Allows integration into statistical process control and measurement systems for
models with measurement data output connector.

OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE

Order No.: 573-701-20

Range : 0-6″

Description :

These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:

• You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.

OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE

Order No.: 573-702-20

Range : 0-6″

Description :

These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:

• You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.

OFFSET CALIPER – SERIES 573 -ABSOLUTE DIGIMATIC AND VERNIER TYPE

Order No.: 573-704-20

Range : 0-12″

Description :

These offset calipers enable you to measure stepped workpieces.
They offer you the following benefits:

• You can adjust the beam-mounted jaw to facilitate measurement of stepped sections and hard-to-reach workpiece features.

OFFSET CENTERLINE CALIPER SERIES 573 

ABSOLUTE DIGIMATIC AND VERNIER TYPES

Order No.: 573-705-20

Range 0.404-6.4″

Description :

These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:

• Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
• You can also measure from an edge to a hole centre.

OFFSET CENTERLINE CALIPER SERIES 573 

ABSOLUTE DIGIMATIC AND VERNIER TYPES

Order No.: 573-706-20

Range 0.404-8.4″

Description :

These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:

• Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
• You can also measure from an edge to a hole centre.

OFFSET CENTERLINE CALIPER SERIES 573 

ABSOLUTE DIGIMATIC AND VERNIER TYPES

Order No.: 573-708-20

Range 0.404-12.4″

Description :

These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:

• Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
• You can also measure from an edge to a hole centre.

ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573

CENTER-TO-CENTER TYPE

Order No.: 573-716-20

Range: 10.1-200 mm

Description : 

The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:

• Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
• You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
• Direct reading of pitch measurements is also available due to the offset value setting function.

ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573

CENTER-TO-CENTER TYPE

Order No.: 573-717-20

Range: 10.1-300 mm

Description : 

The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:

• Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
• You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
• Direct reading of pitch measurements is also available due to the offset value setting function.