- Sort by Price
- Display 12 Products per page
-
D450T | Measurement of foamed material and foils – Measuring range : 0-50 mm | KROEPLIN
Measurement of foamed material and foils
Measuring range : 0-50 mm
Order No. : D450T
-
D2R20 | Tube wall measurement – Measuring range : 0-20 mm | KROEPLIN
Tube wall measurement
Measuring range : 0-20 mm
Order No. D2R20
-
L415 | Internal measurement – Measuring range : 15-65 mm | KROEPLIN
Internal measurement
Measuring range : 15-65 mm
Order No. : L415
-
573-605-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-160mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-605-20
Range 10.1-160 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
K330 | External measurement – Measuring range : 0-30 mm | KROEPLIN
External measurement
Measuring range : 0-30 mm
Order No. K330
-
530-101 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150 mm
Order No. 530-101
Range : 0 – 150mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
K1R10 | Tube wall measurement – Measuring range : 0-10 mm | KROEPLIN
Tube wall measurement
Measuring range : 0-10 mm
Order No. K1R10
-
L370 | Internal measurement – Measuring range : 70-100 mm | KROEPLIN
Internal measurement
Measuring range : 70-100 mm
Order No. : L370
-
573-718-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 -EDGE-TO-CENTER TYPE, 10.1-200mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
EDGE-TO-CENTER TYPE
Order No.: 573-718-20
Range: 10.1-200 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
D110 | External measurement – Measuring range : 0-10 mm | KROEPLIN
External measurement
Measuring range : 0-10 mm
Order No. D110
-
532-102 | VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT 0-180mm | MITUTOYO
VERNIER CALIPER 532 SERIES – WITH FINE ADJUSTMENT
Order No.: 532-102
Range : 0-180 mm
Description :
• Fine-adjustment aids slider positioning.
• Allows step measurement. -
H4M180 | Internal comparison measurement – Measuring range : 180-310 mm | KROEPLIN
Internal comparison measurement
Measuring range : 180-310 mm
Order No. : H4M180
