- Sort by Popularity
- Display 12 Products per page
-
123-113 | Disk Micrometer – Disks with Carbide Tips Series 123, 0-25 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-113
Range : 0-25 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
115-215 | Tube Micrometer – Spherical Anvil and Spindle Type, 0-25mm | MITUTOYO
TUBE MICROMETER – Spherical Anvil and Spindle Type – SERIES 115
Order No. 115-215
Range : 0-25 mm
• Measuring faces: Carbide.
(115-201: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
112-165 | Point Micrometer with Carbide Tip – Series 112, 0-25 mm | MITUTOYO
POINT MICROMETER with Carbide tip – SERIES 112
Order No. : 112-165
Range : 0-25 mm
• Ideal tool for measuring drill web diameters, small grooves and other hardto- reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• Equipped with Ratchet Stop for constant measuring force. -
103-155 | Outside Micrometer Series 103, 450-475 mm | Mitutoyo
Outside Micrometer Series 103
Range 450-475 mm
Graduation 0.01 mm
Order No. 103-155
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-146-10 | Outside Micrometer Series 103, 225-250 mm | Mitutoyo
Outside Micrometer Series 103
Range 225-250 mm
Graduation 0.01 mm
Order No. 103-146-10
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-927-10 | Outside Micrometer Series 103 Set, 0-75 mm, (3 pcs.), 0.01 mm | MITUTOYO
Outside Micrometer Series 103 Set
Range : 0-75 mm (3 pcs./set)
Graduation : 0.01 mm
Order No. 103-927-10
-
105-105 | Outside Micrometer with Anvil Extension Collars 700-800 mm | MITUTOYO
Order No. 105-105
Outside Micrometer with Anvil Extension Collars
Range : 700-800 mm
MITUTOYO
• Adjustable measuring range with extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
143-106 | Caliper Type Micrometers Series 143, 125-150 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-106
Range : 125-150 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-131 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 150-175 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-131
Range : 150-175 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
124-180 | Gear Tooth Micrometer, 175-200 mm | MITUTOYO
Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type
Order No. : 124-180
Range : 175-200 mm
• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Equipped with Ratchet Stop for constant measuring force.
• Ball anvil / spindle tips: optional. -
111-215 | Spline Micrometer, 0-25 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-215
Range. : 0-25 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
114-103 | V-Anvil Micrometer – 3 Flute, 25-40 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 114-103
Range : 25-40 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.
