Digimatic Micrometer

Outside Micrometer Series 406 – Non Rotating Spindle Type

Range : 75-100 mm

Resolution : 0.001 mm

Order No. : 406-253-30

• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force.

340-523

Outside Micrometer with Interchangeable Anvils | 600-700 mm

MITUTOYO

• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force.

Gear Tooth Micrometer – Interchangeable Ball Anvil / Spindle Tip Type

Order No. : 324-253-30

Range : 50-75 mm

• Measures over-pin diameter of gears using precision steel (or carbide) ball anvils / spindle tips.
• IP65 Digimatic gear tooth micrometers.
• Interchangeable ball anvils/spindle tips for various gear modules (0.5 to 5.25) are optional.
• Ball anvil / spindle tips: optional.

SHEET METAL MICROMETER – SERIES 389

This Digimatic Sheet Metal Micrometer is designed with a deep frame, for measuring the thickness of sheet material.

Order No. 389-372-30

Range : 1-2″

Measuring Surface : Spherical / Spherical

• Measures thickness of sheet metal.
• Measuring faces: Carbide.
• Profile of measuring faces: Flat-Flat, Spherical-Flat and Spherical-Spherical.
• Equipped with Ratchet Stop for constant measuring force.

SPLINE MICROMETER SERIES 331

Order No. 331-353-30

Range. : 2-3″

• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• IP65 water / dust protection.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.

DIGIMATIC OUTSIDE MICROMETER Series 293
Order No. 293-821-30
Range : 0-25mm

• Simple design and excluding the data output function keeps price economical.
• One switch operation (Origin Set) for easy use.
• Extended battery life of approximately 2.4 years.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.

Digital Micrometer QuantuMike IP65
Inch/Metric, 2-3″

• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions.

Coolant Proof Micrometer

with Dust/Water Protection Conforming to IP65 Level Series 293

Range : 4-5″

• Superior environmental resistance.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system.

Digimatic Outside Micrometer Series 293

Range : 475-500 mm

Order No. 293-589

• Constant measuring force: ratchet stop
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as
Excel.
• Measuring faces: Carbide.

Blade Micrometer – Non-Rotating Spindle Type Series 422

ไมโครมิเตอร์ปากมีด  

Order No. : 422-232-30

Range : 50-75 mm

• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force.

Caliper Type Micrometers Series 343

Order No. 343-252-30

Range : 50-75 mm

MITUTOYO

• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force.

Disk Micrometer- IP65, QuickMike

Order No. : 369-412-20

Range : 25-55 mm

• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force.