- Sort by Popularity
- Display 12 Products per page
-
167-378 | Setting Standards for Outside Micrometer – SERIES 167 | Mitutoyo
SETTING STANDARD FOR OUTSIDE MICROMETER – SERIES 167
Description
- Used for adjusting the reference point of outside micrometers
Order No. 167-378
Length : 1350 mm
-
167-267 | Setting Standard for Screw Thread Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167
Used for accurately setting screw thread micrometers at the start or end of the measuring range.
Metric (unified) θ = 60°
Order No. 167-267
-
985061 | Color Ratchet Stop Plastic for Analog Micrometer 0-300mm, Red | MITUTOYO
MICROMETER RATCHET STOP PLASTIC
FOR ANALOG MICROMETER 0-300 mm, Red
Order No. 985061
-
350-284-30 | Digimatic Micrometer Head – Series 350 | MITUTOYO
DIGIMATIC MICROMETER HEAD – SERIES 350
Order no. 350-284-30
Range : 0-25 mm
Description :
• Equipped with digital display and output.
• 350-28X-30, 350-261-30, 350-38X-30 and 350-361-30 are protection grade IP65, water-proof Digimatic micrometer heads.
• Digimatic models can be easily integrated into statistical process control and measurement systems. -
148-104-10 | Micrometer Heads – Small Standard Type – SERIES 148 | MITUTOYO
MICROMETER HEAD – SMALL STANDARD TYPE – SERIES 148
Order no. 148-104-10
Range: 0-13mm
Description :
• Measuring range of 13 mm.
-
150-822 | Micrometer Heads – Medium-size standard Type – SERIES 150 | MITUTOYO
MICROMETER HEAD – MEDIUM-SIZED STANDARD TYPE – SERIES 150
Order no. 150-822
Range: 0-25mm
Description :
• Measuring range of 25 mm.
-
153-201 | Micrometer Heads – Non-rotating Spindle Type – SERIES 153 | MITUTOYO
MICROMETER HEAD – NON-ROTATING SPINDLE – SERIES 153
MITUTOYO
Order no. 153-201
Range: 0-25mm
Description :
- Micrometer head with non-rotating spindle.
- Torsion-free feed reduces workpiece deformation and wear.
-
152-401 | Micrometer Head – XY-Stage Type SERIES 152 | MITUTOYO
MICROMETER HEAD – XY-STAGE TYPE SERIES 152
MITUTOYO
ORDER NO. : 152-401
DESCRIPTION :
These XY Stage type micrometer heads let you read measurement values easily.
They offer the following benefits:- Micrometer heads especially designed for accurate cross-travel stage translation in X and Y axes.
- Spindle end: Flat form and hardened, or spherical with carbide tip (more than HRA90), lapped surface.
-
04AZA163 | Precision Leadscrew – 13mm Stroke | MITUTOYO
PRECISION LEADSCREW | MITUTOYO
Order No. : 04AZA163
Range : 0-13 mm
Description :
- Mitutoyo manufacture simple and less expensive precision leadscrews for precise positioning mechanisms and fine-feed mechanisms, in addition to standard micrometer heads..
- Mitutoyo also manufacture leadscrews with special specifications, such as 0.25 mm pitch, as well as those with the standard 0.5 mm feed pitch and with dimensions and forms that meet customer requirements.
-
573-622-20 | POINT CALIPER SERIES 573-ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0-150 mm | MITUTOYO
POINT CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-622-20 (without thumb roller)
Range : 0-150 mm
Description :
These point calipers have extra fine ground measuring jaws. They offer you the following benefits:
- Narrow-tip jaws fit into very small grooves and tracks, making it much easier for you to obtain many previously difficult outside measurements.
-
406-251-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 25-50 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 25-50 mm
Resolution : 0.001 mm
Order No. : 406-251-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
523-141 | Snap Meters – Series 523, 0-25 mm | MITUTOYO
Snap Meters – Series 523
Order No. : 523-141
Range: 0-25 mm
• Suited for the measurement of mass-produced parts.
• Various indicators (optional) are available to suit accuracy and resolution requirements.
• Measuring faces: Carbide.
