- Sort by Date
- Display 12 Products per page
-
406-351-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 1-2″ | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 1-2″
Resolution : 0.00005″/0.001 mm
Order No. : 406-351-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
406-350-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 0-1″ | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 0-1″
Resolution : 0.00005″/0.001 mm
Order No. : 406-350-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
406-253-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 75-100 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 75-100 mm
Resolution : 0.001 mm
Order No. : 406-253-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
406-252-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 50-75 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 50-75 mm
Resolution : 0.001 mm
Order No. : 406-252-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
406-250-30 | Outside Micrometer Series 406 – Non Rotating Spindle Type, 0-25 mm | Mitutoyo
Outside Micrometer Series 406 – Non Rotating Spindle Type
Range : 0-25 mm
Resolution : 0.001 mm
Order No. : 406-250-30
• The non-rotating spindle type does not apply rotational pressure to a measured object and is therefore suitable for measurement of soft materials and thin films.
• Measuring face of the spindle is carbide tipped.
• Spindle ø6.35 mm
• Equipped with Ratchet Stop for constant measuring force. -
107-208 | Indicator Type Micrometer Series 107, 175-200 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 175-200 mm
Order No. : 107-208
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
107-207 | Indicator Type Micrometer Series 107, 150-175 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 150-175 mm
Order No. : 107-207
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
107-206 | Indicator Type Micrometer Series 107, 125-150 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 125-150 mm
Order No. : 107-206
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
107-205 | Indicator Type Micrometer Series 107, 100-125 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 100-125 mm
Order No. : 107-205
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
107-204 | Indicator Type Micrometer Series 107, 75-100 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 75-100 mm
Order No. : 107-204
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
107-203 | Indicator Type Micrometer Series 107, 50-75 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 50-75 mm
Order No. : 107-203
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
107-202 | Indicator Type Micrometer Series 107, 25-50 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 25-50 mm
Order No. : 107-202
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer.
