- Sort by Popularity
- Display 12 Products per page
-
141-101 | INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE , 25-50mm | MITUTOYO
INSIDE MICROMETERS SERIES 141 – INTERCHANGEABLE ROD TYPE
Order No. 141-101
Range: 25-50mm
Description:
• Wide range of inside measurements possible by combining one or more Interchangeable Rods.
• For models supplied with more than one Interchangeable Rod, the full measuring range is achieved by combining spacing collars with the rods. -
526-102 | BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES, 10-18mm | MITUTOYO
BORE GAGES SERIES 526 – FOR EXTRA SMALL HOLES
Order No.: 526-102
Range: 10-18 mm
Description:
• This series allows for agile and highly accurate comparative measurement of ø7 to 18 mm inside diameters.
• We offer an array of indicators. Contact us if you prefer any indicator other than the standard recommended indicator.
• Optional stand (215-120-10) is available for efficient measurement of multiple small holes. -
511-766-20 | BORE GAGE SERIES 511 – SHORT LEG TYPE, 18-35mm | MITUTOYO
BORE GAGE SERIES 511 – SHORT LEG TYPE
Order No.: 511-766-20
Range: 18-35 mm
Description:
• As it is light and easy to handle with a short rod below the grip, the operator can work smoothly when inserting it into a narrow space or measuring an object on the table.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• The grip minimizes the variation of indicator values affected by heat transfer from the operator’s hand. -
511-435-20 | BORE GAGES SERRIES 511 – for BLIND HOLES, 15-35mm | MITUTOYO
BORE GAGE SERIES 511 FOR BLIND HOLES
Order No.: 511-435-20
Range: 15-35mm
Description :
• Capable of ID (inside diameter) measurement close to the bottom of a hole.
• The contact point and anvil have a carbide ball tip that is highly durable and abrasion resistant.
• Optional Extension Rods can be attached for measuring deep holes. -
177-204 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-204
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
177-302 | SETTING RINGS SERIES 177 – STEEL | MITUTOYO
SETTING RING
Accessories for Inside Micrometers, Hotest and Dial Bore Gages
Brand : MITUTOYO
Order No. 177-302
Description :
• Used for quick and accurate setting of dial bore gages, Holtest, and inside micrometers.
• Actual diameter is marked in 0.001 mm increments. (Dimension measuring position is the center of the height T.) -
500-714-20 | ABSOLUTE COOLANT PROOF CALIPER SERIES 500 – with Dust/Water Protection Comforming to IP67 Level | MITUTOYO
ABSOLUTE COOLANT PROOF CALIPER SERIES 500 with Dust/Water Protection Conforming to IP67 Level
Brand : Mitutoyo
Order No. : 500-714-20
Range : 0-300 mm
Description :
• Can be used in workshop conditions exposed to coolant, water, dust or oil.
100% air-leak test ensures every caliper conforms to IP67.
• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Easy to use — advanced ergonomic design uses only 1 button.
• Battery cap does not require a screw driver for battery replacement.
• Can be integrated into statistical process control and measurement systems. -
500-195-30 | ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology | MITUTOYO
ABSOLUTE DIGIMATIC CALIPER SERIES 500 – with exclusive ABSOLUTE Encoder Technology
Order No. : 500-195-30
Range : 0-4″
Description :
• The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale. In addition, no overspeed-errors will occur.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
• Allows integration into statistical process control and measurement systems for models with measurement data output connector. -
500-464 | ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED | MITUTOYO
ABSOLUTE SOLAR CALIPER – NO BATTERY OR ORIGIN RESET NEEDED
Order No.: 500-464
Range : 0-6″
Description:
This ABSOLUTE digimatic solar caliper enables you to take reliable measurements and offers you the following benefits:
- You can operate it in just 60 lux ambient lighting.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
- ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.
-
531-108 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-200mm/0-8″ | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-108
Range : 0-200mm/0-8″
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
-
552-305-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552-with standard jaws 0-1500mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with standard jaws
Order No.: 552-305-10
Range : 0-1500 mm
Description :
This is a lightweight standard model of Digimatic caliper with steel jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
552-195-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with interchangeable jaw, 0-80″ | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with interchangeable jaw
Order No.: 552-195-10
Range: 0-80″
Description:
This is a lightweight standard model of Digimatic caliper with optional interchangeable jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fiber reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
