- Sort by Price
- Display 12 Products per page
-
193-102 | Digit outside Micrometer Series 193, 25-50 mm | MITUTOYO
Digit Outside Micrometer Series 193
Range : 25-50 mm
Order No. : 193-102
• Mechanical digit counter with 0.01 mm or 0.001 in resolution for quick and error-free reading.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
536-212 | SWIVEL VERNIER CALIPER SERIES 536 – MOVING JAW TYPE, 0-200mm | MITUTOYO
SWIVEL VERNIER CALIPER SERIES 536
MOVING JAW TYPE
Order No. 536-212
Range : 0-200mm
Description :
These vernier calipers have a swivelling jaw. They offer you the following benefits:
- You can rotate the moving jaw to measure sectioned shafts.
- With depth bar.
-
515-374 | DIGITAL HEIGHT MASTER Series 515 | MITUTOYO
• For calibrating and setting height gages.
• Staggered arrangement of block stack have two measuring faces on the same level, one facing up and the other down.
• Equipped with a data output port that enables incorporation into measurement networking and statistical process control systems.
-
125-101 | Screw Thread Micrometer, 0-25 mm, 0.4-0.5 mm/64-48TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-101
Range : 0-25 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
167-262 | Setting Standard for Screw Thread Micrometer – Series 167 | MITUTOYO
SETTING STANDARD FOR SCREW THREAD MICROMETER – SERIES 167
Used for accurately setting screw thread micrometers at the start or end of the measuring range.
Metric (unified) θ = 60°
Order No. 167-262
-
Steel Standard Straight Edge-บรรทัดเช็คตรงแบบเรียบ-SK
Steel Standard Straight Edge-บรรทัดเช็คตรงแบบเรียบ-SK
-
L330 | Internal measurement – Measuring range : 30-60 mm | KROEPLIN
Internal measurement
Measuring range : 30-60 mm
Order No. : L330
-
345-250-30 | INSIDE MICROMETER SERIES 345 – CALIPER TYPE, 5-30mm | MITUTOYO
INSIDE MICROMETER SERIES 345 – CALIPER TYPE
Order No. 345-250-30
Range: 5-30 mm
Description:
• Carbide measuring faces.
• Equipped with a constant measuring-force device.
• Optional Setting Rings (nominal size below 300 mm), CERA Inside Micro Checker (more than 25 mm) and Gauge Block Accessory Sets are available as reference gages for datum adjustment. -
552-181-10 | ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552 – with interchangeable jaw, 0-450mm | MITUTOYO
ABSOLUTE COOLANT PROOF CARBON FIBER CALIPER SERIES 552
with interchangeable jaw
Order No.: 552-181-10
Range: 0-450mm
Description:
This is a lightweight standard model of Digimatic caliper with optional interchangeable jaws.
It offers you the following benefits:- Its ultra-lightweight design (with carbon fibre reinforced material) reduces total weight by up to 50%.
- It has excellent resistance against water and dust (IP66 protection level) enabling you to use it in machining situations that include splashing coolant fluid.
- Direct readout of inside measurements from the LCD (you can easily set the offset value by using the offset button).
- Preset function lets you set a desired starting point.
-
395-251-30 | Tube Micrometer, 0-25mm | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-251-30
Range : 0-25mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force.
