- Sort by Date
- Display 12 Products per page
-
573-717-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – CENTER-TO-CENTER TYPE, 10.1-300mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
CENTER-TO-CENTER TYPE
Order No.: 573-717-20
Range: 10.1-300 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
573-716-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – CENTER-TO-CENTER TYPE, 10.1-200mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
CENTER-TO-CENTER TYPE
Order No.: 573-716-20
Range: 10.1-200 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
573-719-20 | ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573 – EDGE-TO-CENTER TYPE, 10.1-300mm | MITUTOYO
ABSOLUTE BACK-JAW CENTERLINE CALIPER SERIES 573
EDGE-TO-CENTER TYPE
Order No.: 573-719-20
Range: 10.1-300 mm
Description :
The ABSOLUTE Digimatic back-jaw centreline calipers offer you the following benefits:
- Specially designed to allow you to measure hole centre-to-centre or edge-to-centre distances.
- You can read measurements more easily from above, thanks to the jaws being on the back of the slide.
- Direct reading of pitch measurements is also available due to the offset value setting function.
-
536-107 | OFFSET CENTERLINE CALIPER SERIES 536, 10.1-300mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 536
Order No.: 536-107
Range : 10.1-300 mm
Description :
This Offset Centerline Caliper enables you to measure center-to-center distance and offers you the following benefits:
- Center-to-center measurements for holes on the same plane or between offset planes
- Edge to center measurements
-
536-106 | OFFSET CENTERLINE CALIPER SERIES 536, 10.1-200mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 536
Order No.: 536-106
Range : 10.1-200 mm
Description :
This Offset Centerline Caliper enables you to measure center-to-center distance and offers you the following benefits:
- Center-to-center measurements for holes on the same plane or between offset planes
- Edge to center measurements
-
536-105 | OFFSET CENTERLINE CALIPER SERIES 536, 10.1-150mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 536
Order No.: 536-105
Range : 10.1-150 mm
Description :
This Offset Centerline Caliper enables you to measure center-to-center distance and offers you the following benefits:
- Center-to-center measurements for holes on the same plane or between offset planes
- Edge to center measurements
-
573-708-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0.404-12.4″ | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-708-20
Range 0.404-12.4″
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
573-706-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0.404-8.4″ | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-706-20
Range 0.404-8.4″
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
573-705-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 0.404-6.4″ | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-705-20
Range 0.404-6.4″
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
573-618-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-300mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-618-20
Range 10.1-300 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
573-608-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-300mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-608-20
Range 10.1-300 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
-
573-616-20 | OFFSET CENTERLINE CALIPER SERIES 573 – ABSOLUTE DIGIMATIC AND VERNIER TYPES, 10.1-210mm | MITUTOYO
OFFSET CENTERLINE CALIPER SERIES 573
ABSOLUTE DIGIMATIC AND VERNIER TYPES
Order No.: 573-616-20
Range 10.1-210 mm
Description :
These offset centreline calipers enable you to measure centre to centre distance.
They offer you the following benefits:- Specially designed for hole centre-to-centre measurements in the same plane, or between offset planes.
- You can also measure from an edge to a hole centre.
