- Sort by Popularity
- Display 12 Products per page
-
536-136 | BLADE TYPE CALIPER SERIES 536, 0-300mm | MITUTOYO
BLADE TYPE CALIPER SERIES 536
Order No.: 536-136
Range : 0-300 mm
Description :
These blade calipers have thin measuring jaws. They offer you the following benefits:
- The thin blade-type jaws fit into very small grooves making it much easier for you to obtain many previously difficult outside measurements.
- The outside measuring faces are carbide.
-
530-316 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*Clamping screw below the slider
Order No. 530-316
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
534-110 | LONG JAW VERNIER CALIPER-SERIES 534, 0-500mm | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-110
Range : 0-500 mm
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
536-212 | SWIVEL VERNIER CALIPER SERIES 536 – MOVING JAW TYPE, 0-200mm | MITUTOYO
SWIVEL VERNIER CALIPER SERIES 536
MOVING JAW TYPE
Order No. 536-212
Range : 0-200mm
Description :
These vernier calipers have a swivelling jaw. They offer you the following benefits:
- You can rotate the moving jaw to measure sectioned shafts.
- With depth bar.
-
531-102 | VERNIER CALIPER SERIES 531 – WITH THUMB GRIP 0-200mm | MITUTOYO
VERNIER CALIPER 531 SERIES – WITH THUMB GRIP
Order No.: 531-102
Range : 0-200 mm
Description :
• The slider moves only when the spring loaded thumb grip is depressed.
• Allows step measurement.
-
534-116 | LONG JAW VERNIER CALIPER-SERIES 534, 0-750mm | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-116
Range : 0-1000 mm
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
530-124 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-300mm| MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL
*High accuracy model*
Order No. 530-124
Range : 0 – 300 mm
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
160-101 | VERNIER CALIPER SERIES 160 – with nib style jaws and fine adjustment, 0-600mm | MITUTOYO
VERNIER CALIPER SERIES 160
with nib style jaws and fine adjustment
Order No.: 160-101
Range: 0-600 mm
Description :
These vernier calipers with nib style jaws come with or without fine adjustment.
They offer you the following benefits:- For the metric only models the top offset vernier scale allows you to directly read the inside dimensions without having to add the nib widths.
- Main scale and vernier scale satin chrome finish gives you high readability.
-
536-142 | INSIDE CALIPER SERIES 536, KNIFE EDGE TYPE, 10-200mm | MITUTOYO
INSIDE CALIPER SERIES 536
KNIFE EDGE TYPE
Order No.: 573-145
Range : 10-200 mm
Description :
• Dedicated caliper for inside measurement.
-
530-312 | VERNIER CALIPER SERIES 530 – STANDARD MODEL 0-150mm/0-6″ | MITUTOYO
VERNIER CALIPER SERIES 530 – STANDARD MODEL with metric/inch double scale
*High accuracy model: ±0.03mm
Order No. 530-312
Range : 0-150mm/0-6″
Description :
• Stepped graduation face prevents dust ingress between the main scale and slider.
• The small vernier face angle (14°) provides easy reading.
• Can measure steps, since the end faces of the beam and slider are the zero reference point (measuring face). Standard calipers allow four types of measurement, i.e. outside, inside, depth, and step.
• Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc. -
534-101 | LONG JAW VERNIER CALIPER-SERIES 534, 0-300mm / 0-12″ | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-101
Range : 0-300 mm / 0-12″
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
-
534-109 | LONG JAW VERNIER CALIPER-SERIES 534, 0-300mm | MITUTOYO
LONG JAW VERNIER CALIPER-SERIES 534
Orange No. : 534-109
Range : 0-300 mm
Description :
These vernier calipers with long jaws come with or without fine adjustment and let you measure hard-to-reach features.
They offer you the following benefits:- Long jaws enable you to measure hard-to-reach workpiece features.
- The top offset vernier scale allows you to directly read the inside dimensions without having to add the jaw blade width.
