- Sort by Popularity
- Display 12 Products per page
-
143-111 | Caliper Type Micrometers Series 143, 250-275 mm | MITUTOYO
Caliper Type Micrometers Series 143
Order No. 143-111
Range : 250-275 mm
MITUTOYO
• Effective for measuring workpiece features where access is difficult.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
126-136 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 275-300 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-136
Range : 275-300 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
169-202-10 | Disk Micrometer – Non-Rotating Spindle, 25-50mm | MITUTOYO
Disk Micrometer – Non-Rotating Spindle
Order No. : 169-202-10
Range : 25-50mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force. -
111-119 | Spline Micrometer, 100-125 mm | MITUTOYO
SPLINE MICROMETER SERIES 111
Order No. 111-119
Range. : 100-125 mm
• The anvil and spindle have a small diameter for measuring splined shafts, slots and keyways.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
114-162 | V-Anvil Micrometer – 3 Flute, 10-25 mm | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 114-162
Range : 10-25 mm
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
102-911-40 | Outside Micrometer Set Series 102, 0-100 mm| MITUTOYO
Outside Micrometer Series 102
Range : 0-100 mm
Order No. : 102-911-40
• Heat-insulated frame.
• Cut-away frame (behind anvil) for measuring in hard-to-reach places.
• Equipped with Ratchet Stop for constant measuring force.
• Measuring faces: Carbide.
• In addition to standard specification, a non-rotating spindle type tooth thickness micrometer is also available. -
103-163 | Outside Micrometer Series 103, 650-675 mm | Mitutoyo
Outside Micrometer Series 103
Range 650-675 mm
Graduation 0.01 mm
Order No. 103-163
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
117-101 | “Uni-Mike” Interchangeable Anvil Micrometer, 0-25 mm | MITUTOYO
“Uni-Mike” Interchangeable Anvil Micrometer Series 117
Order No. 117-101
Range : 0 -25 mm
• A selection of interchangeable anvils (rod anvils and V-anvils) enables measurement of tube thickness, rivet head height and similar features just by replacing the anvil to suit.
• Equipped with Ratchet Stop for constant measuring force. -
105-411 | Outside Micrometer with Anvil Extension Collars 1300-1400 mm | MITUTOYO
Order No. 105-411
Outside Micrometer with Anvil Extension Collars
Range : 1300-1400 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
125-111 | Screw Thread Micrometer, 50-75 mm, 0.6-0.9 mm / 44-28 TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-111
Range : 50 – 75 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
123-107 | Disk Micrometer – Hardened Steel Disk Series 123, 150-175 mm, Disk=30 mm | MITUTOYO
Disk Micrometer – Hardened Steel Disks
Order No. 123-107
Range : 150-175 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
115-115 | Tube Micrometer, 0-25mm | MITUTOYO
TUBE MICROMETER – SERIES 115
Order No. 115-115
Range : 0-25 mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force.
