- Sort by Popularity
- Display 36 Products per page
-
314-353-30 | V-Anvil Micrometer – 3 Flutes, 1-1.6″ | MITUTOYO
V-ANVIL MICROMETER – 3 FLUTE
Order No. : 314-353-30
Range : 1-1.6″
• Measures the outside diameter of taps and reamers with an odd number of flutes.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
293-181-30 | QuantuMike IP65 Digimatic Micrometer with 2mm/rev Spindle Feed Inch/Metric, 1-2″ | MITUTOYO
Digital Micrometer QuantuMike IP65
Inch/Metric, 1-2″• Faster measurement is achieved by using a thread which feeds the spindle by 2 mm per revolution of the thimble. Our own technology for high precision thread-cutting enables such a fine and quick measurement.
• Positioning times are reduced by 60%* and measuring times by 35%* compared with a conventional micrometer.
* According to Mitutoyo’s comparison test data for measuring time on typical workpieces.
• The ratchet thimble mechanism helps ensure repeatable results. The sound of the ratchet provides the user with a sense of confidence and the speeder enables the rapid spindle feed needed when measuring widely different dimensions. -
293-332-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Inch / Metric
Range : 2-3″ mm
• Superior environmental resistance.
• Ratchet thimble provides better operability for one-handed operation.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-584 | Digimatic Outside Micrometer Series 293, 350-375 mm | MITUTOYO
Digimatic Outside Micrometer Series 293
Range : 350-375 mm
Order No. 293-584
• Constant measuring force: ratchet stop
• Interface Input Tools are available that enable the conversion of measurement data to keyboard signals that are then directly input to cells in off-the-shelf spreadsheet software such as
Excel.
• Measuring faces: Carbide. -
700-118-30 | QUICKmini Series 700 | MITUTOYO
QUICKmini Series 700
Range : 0-5″ / 0-12 mm
Order No. : 700-118-30
• Lightweight, compact, palm-sized device.
• Measurement of small, thin workpieces is possible by only a single operation.
• Electromagnetic induction type ABSOLUTE encoder is adopted.
• Built-in ABS (absolute) scale requires no zero-set every time the power is turned on. In addition, reliability has improved by eliminating overspeed errors. -
340-720 | Outside Micrometer with Interchangeable Anvils, 12-18″ | MITUTOYO
340-720
Outside Micrometer with Interchangeable Anvils | 12-18″
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
369-250-30 | Disk Micrometer, IP65 – 0-25 mm, Non-Rotating Spindle, Disk=20mm | MITUTOYO
Disk Micrometer- IP65, Non-Rotating Spindle
Order No. : 369-250-30
Range : 0-25mm
Disk : 20 mm
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module.
• Equipped with Ratchet Stop for constant measuring force. -
395-353-30 | Tube Micrometer, Inch/Metric, 2-3″ | MITUTOYO
TUBE MICROMETER – SERIES 395
Order No. 395-353-30
Range : 2-3″
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force. -
342-252-30 | Point Micrometer – Series 342, 25-50 mm | MITUTOYO
POINT MICROMETER – SERIES 342
Order No. : 342-252-30
Range : 25-50 mm
• Ideal tool for measuring drill web diameters, small grooves and other hard-to-reach points.
• The measuring points (carbide tipped) have approximately 0.3 mm radius.
• IP65 Digimatic micrometers.
• Equipped with Ratchet Stop for constant measuring force. -
323-250-30 | Disk Micrometer Series 323, 0-25 mm, Disk 20mm | MITUTOYO
Disk Micrometer
Order No. 323-250-30
Range : 0-25mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
293-251-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Size : 125-150 mm
• Superior environmental resistance.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system. -
293-356-30 | Coolant Proof Micrometer with Dust/Water Protection Conforming to IP65 Level Series 293 | MITUTOYO
Coolant Proof Micrometer
with Dust/Water Protection Conforming to IP65 Level Series 293
Range : 10-11″
• Superior environmental resistance.
• Measuring faces: Carbide.
• Oil-resistant material used for all plastic parts.
• Models equipped with a Digimatic output port can form part of a statistical process control or networked measurement system.
