- Sort by Popularity
- Display 12 Products per page
-
103-130 | Outside Micrometer Series 103, 25-50 mm, 0.001mm | Mitutoyo
Outside Micrometer Series 103
Range 25 – 50 mm
Graduation 0.001 mm
Order No. 103-130
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
103-171 | Outside Micrometer Series 103, 850-875 mm | Mitutoyo
Outside Micrometer Series 103
Range 850-875 mm
Graduation 0.01 mm
Order No. 103-171
• Baked-enamel-finished frame.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
107-208 | Indicator Type Micrometer Series 107, 175-200 mm | Mitutoyo
Indicator Type Micrometer Series 107 (without indicator)
Range : 175-200 mm
Order No. : 107-208
• Designed to mount a dial indicator for direct GO/±NG judgment on mass-produced parts.
• Anvil retracting trigger for quick measurement.
• Various kinds of indicators* are selectable depending on the measurement type
(accuracy required, measuring range, etc.).
• Measuring faces: Carbide.
• Anvil stroke: 3 mm.
* Indicators with stems cannot be installed on this micrometer. -
146-132 | Groove Micrometers -Rotating Spindle Series 146 – 0-1″, 0.5″ Flange | MITUTOYO
Groove Micrometers – Rotating Spindle Series 146
ไมโครมิเตอร์วัดแบบตัว Groove
Order No. 146-132
Flange : 0.5 mm
-
422-360-30 | Blade Micrometer – non rotating spindle type – Series 422 | Mitutoyo
Blade Micrometer – non rotating spindle type – Series 422
Range: 0-1″
Order No.: 422-360-30
• The anvil and spindle are blade-shaped for measuring the groove diameter of shafts, keyways, and other hard-to-reach features.
• Carbide-tipped measuring faces are available.
• Non-rotating spindle type.
• Equipped with Ratchet Stop for constant measuring force. -
340-521 | Outside Micrometer with Interchangeable Anvils, 400-500 mm | MITUTOYO
340-521
Outside Micrometer with Interchangeable Anvils | 400-500 mm
MITUTOYO
• Wide measuring range with interchangeable anvils.
• Measuring face of the spindle is carbide tipped (standard model).
• IP 65 water / dust protection (340-251-30, 340-252-30, 340-351-30, 340-352-30).
• Equipped with Ratchet Stop for constant measuring force. -
105-421 | Outside Micrometer with Anvil Extension Collars 1600-1800 mm | MITUTOYO
Order No. 105-421
Outside Micrometer with Anvil Extension Collars
Range : 1600-1800 mm
MITUTOYO
• Large, lightweight micrometer with excellent strength based on a pipe structure frame made of a combination of square and round pipes.
• Wide measuring range with anvil extension collars.
• 50 mm/ 2 in spindle stroke.
• Measuring faces: Carbide.
• Equipped with Ratchet Stop for constant measuring force. -
125-104 | Screw Thread Micrometer, 0-25 mm, 2-3 mm/13-9TPI | MITUTOYO
Screw Thread Micrometer
Order No. 125-104
Range : 0-25 mm
• Fitted with one type of anvil / spindle tip for screw thread measurement.
• The measurement result is directly readable (no need for calculation).
• Equipped with Ratchet Stop for constant measuring force.
• Fixed anvil type to suit 60º threads. -
126-133 | Screw Thread Micrometer Interchangeable Anvil/Spindle Tip Type 200-225 mm | MITUTOYO
Screw Thread Micrometer
Order No. 126-133
Range : 200-225 mm
• Use by installing a suitable interchangeable anvil / spindle tip pair.
• Direct reading of screw pitch diameter (no need for calculation).
• Series 326 is a protection grade IP65, waterproof Digimatic screw thread micrometer with interchangeable anvil / spindle tip.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard for adjusting zero point for metric (unified) 60º threads.
• Interchangeable anvils / spindle tips are optional. -
123-116 | Disk Micrometer – Disks with Carbide Tips Series 123, 75-100 mm, Disk=20 mm | MITUTOYO
Disk Micrometer – with Carbide Tips
Order No. 123-116
Range : 75-100 mm
• Measures “root tangent length” of spur gears and helical gears.
• Equipped with Ratchet Stop for constant measuring force.
• Supplied with a setting standard (except for 0 to 25 mm/0 to 1 in measuring range). -
369-421-20 | Disk Micrometer – Non-Rotating Spindle, IP65, QuickMike, Inch/Metric, 0-1.2″ | MITUTOYO
369-421-20 | Disk Micrometer – Non-Rotating Spindle, IP65, QuickMike, Inch/Metric, 0-1.2″ | MITUTOYO
Disk Micrometer QuickMike- Non-Rotating Spindle – IP65
Order No. : 369-421-20
Range : 0-1.2″
• Measures “root tangent length” of spur gears and helical gears.
• Non-rotating spindle type.
• Measurable range of gear pitch: 0.5 to 6 module (series 227: 0.4 to 3 module).
• Equipped with Ratchet Stop for constant measuring force. -
115-101 | Tube Micrometer, 0-15mm | MITUTOYO
TUBE MICROMETER – SERIES 115
Order No. 115-101
Range : 0-15 mm
• Measuring faces: Carbide. (115-101: only the spindle is carbide tipped.)
• series 395: IP65 digimatic model.
• Equipped with Ratchet Stop for constant measuring force.
